
Jewaytec Automatic Hand Sanitizer Dispenser 700ml Gel/Liquid


IMPORTANT INSTALLATION
Distance from table exceeds 50cm(20"). Power supply 4 AA alkaline batteries (not included)

700ML CAPACITY
The 700ml large-capacity design is suitable for all kinds of liquid soap such as hand soap, detergent, shampoo, shower gel, etc.

COMPACT SIZE
Minimalist design with compact size, suitable for home & Public use.

24-Hour Service
We will try our best to reply and solve all messages and questions within 24 hours.

INSTALLATION AND USE
1. Use the mounting plate as a template to mark the position.
2. Create two 5mm holes and insert plugs into each of them.
3. Use the provided screws to secure the mounting plate to the wall.
4. Slide the dispenser onto the mounting plate.
5. Insert the 4oc battery into the battery compartment following the proper orientation as indicated on the compartment. An alkaline battery is highly recommended.
6. Open the cover and fill the container with liquid.
7. Put your hand under the sensor at a distance of 0-10cm, and allow the dispenser to continuously operate until liquid emerges from the nozzle. (When you use the dispenser for the first time, there is air in the pump, so you need to operate it several times until the liquid falls down.)

Wide Use For Schools, Hotels, Hospitals, Offices and Other Public Places


Jewaytec Auto Soap Dispenser
Wide Use For Schools, Hotels, Hospitals, Offices and Other Public Places
Jewaytec Auto Soap Dispenser
Wide Use For Schools, Hotels, Hospitals, Offices and Other Public Places

Jewaytec Automatic Hand Sanitizer Dispenser 700ml Gel/Liquid


IMPORTANT INSTALLATION
Distance from table exceeds 50cm(20"). Power supply 4 AA alkaline batteries (not included)

700ML CAPACITY
The 700ml large-capacity design is suitable for all kinds of liquid soap such as hand soap, detergent, shampoo, shower gel, etc.

COMPACT SIZE
Minimalist design with compact size, suitable for home & Public use.

24-Hour Service
We will try our best to reply and solve all messages and questions within 24 hours.

INSTALLATION AND USE
1. Use the mounting plate as a template to mark the position.
2. Create two 5mm holes and insert plugs into each of them.
3. Use the provided screws to secure the mounting plate to the wall.
4. Slide the dispenser onto the mounting plate.
5. Insert the 4oc battery into the battery compartment following the proper orientation as indicated on the compartment. An alkaline battery is highly recommended.
6. Open the cover and fill the container with liquid.
7. Put your hand under the sensor at a distance of 0-10cm, and allow the dispenser to continuously operate until liquid emerges from the nozzle. (When you use the dispenser for the first time, there is air in the pump, so you need to operate it several times until the liquid falls down.)

Wide Use For Schools, Hotels, Hospitals, Offices and Other Public Places
































