
Why Choose an Automatic Hand Sanitizer Dispenser?
? Auto-Sensing Foam – Infrared detection delivers foam in 0.25s for a convince, no-touch experience.
? 6 Adjustable Dispensing Modes – Customize foam volume (0.3s/0.8s/1.2s/1.6s/2s/2.4s) with one-touch control.
? Continuous Foam Mode – Perfect for heavy-duty cleaning (dishes, countertops, grills, etc.).
? USB Rechargeable & Long-Lasting – 5,000 uses per charge (˜90 days), saving battery costs.
? IPX6 Waterproof – Good for humid areas (kitchens/bathrooms) with a protected charging port.
? Large 400ml Tank – Clear window shows soap level, reducing frequent refills.
? Sleek & Space-Saving – Modern minimalist design, wall-mountable or countertop use.
(Ideal for homes, restaurants & offices – confortable, efficient & stylish!)

Why is no liquid/water dispensed?
A: Troubleshooting steps:
Check power.
Refill or unclog the soap/water container.
Clean the sensor or nozzle (dirt may block detection).

How do you clean soap dispenser if the pipe is blocked?
1.Unscrew the dispenser and Remove the filter at the end of tube
2.Use the little clear squeezable bottle(including in the package ) and then add some water into it
3.Connect the long beak of this little clear bottle to the tube
4.Squeeze the water into the tube end,It may not be smooth at first, push the water out repeatedly until the water flows normally

6LEVEL ADJUSTABLE & FAST CAHRGING FOAM DISPENSER FOR KITCHEN
Designe with our 6 adjustable settings and 0.2-second rapid foam dispensing. Our sensitive sensor system allows you to effortlessly adjust the soap volume according to your needs. Imagine a future where you never worry about recharging again! Our SOAP DISPENSER is packed with a fast TYPE-C charging port. With just one quick charge, it can powers for 90 days! That’s three whole months of effortless, perfect for busy lives and even busier hands. Say goodbye to the hassle of constant recharging !

IPX6 WATERPROOF BATHROOM SOAP DISPENSER
Our dispenser is armed with an IPX6 waterproof system, making it work well for your kitchen and bathroom. our dispenser is designed to last, no matter how wet.are you ready to embrace durable soap dispenser?

FAQ
This soap dispenser works, but no foam,how should i do?
1.Check Power Supply
"Ensure the dispenser is properly charged. For first-time use, charge it fully before operating."
2.Verify Switch Status
"Make sure the dispenser is switched on—look for a steady or blinking light to confirm activation."
3.Inspect for Blockages
"If foam isn’t dispensing, check if the soap path is blocked and clear any obstructions."
4.Sensor Functionality
"Place your hand directly under the sensor at the recommended distance (usually 2–4 inches)."
5.Seek Support
"If issues persist after troubleshooting, we provide further assistance within 24 hours."

Automatic Soap Dispenser
Enhances the look of bathrooms or kitchens with a sleek, automated system
Automatic Soap Dispenser
Enhances the look of bathrooms or kitchens with a sleek, automated system

Why Choose an Automatic Hand Sanitizer Dispenser?
? Auto-Sensing Foam – Infrared detection delivers foam in 0.25s for a convince, no-touch experience.
? 6 Adjustable Dispensing Modes – Customize foam volume (0.3s/0.8s/1.2s/1.6s/2s/2.4s) with one-touch control.
? Continuous Foam Mode – Perfect for heavy-duty cleaning (dishes, countertops, grills, etc.).
? USB Rechargeable & Long-Lasting – 5,000 uses per charge (˜90 days), saving battery costs.
? IPX6 Waterproof – Good for humid areas (kitchens/bathrooms) with a protected charging port.
? Large 400ml Tank – Clear window shows soap level, reducing frequent refills.
? Sleek & Space-Saving – Modern minimalist design, wall-mountable or countertop use.
(Ideal for homes, restaurants & offices – confortable, efficient & stylish!)

Why is no liquid/water dispensed?
A: Troubleshooting steps:
Check power.
Refill or unclog the soap/water container.
Clean the sensor or nozzle (dirt may block detection).

How do you clean soap dispenser if the pipe is blocked?
1.Unscrew the dispenser and Remove the filter at the end of tube
2.Use the little clear squeezable bottle(including in the package ) and then add some water into it
3.Connect the long beak of this little clear bottle to the tube
4.Squeeze the water into the tube end,It may not be smooth at first, push the water out repeatedly until the water flows normally

6LEVEL ADJUSTABLE & FAST CAHRGING FOAM DISPENSER FOR KITCHEN
Designe with our 6 adjustable settings and 0.2-second rapid foam dispensing. Our sensitive sensor system allows you to effortlessly adjust the soap volume according to your needs. Imagine a future where you never worry about recharging again! Our SOAP DISPENSER is packed with a fast TYPE-C charging port. With just one quick charge, it can powers for 90 days! That’s three whole months of effortless, perfect for busy lives and even busier hands. Say goodbye to the hassle of constant recharging !

IPX6 WATERPROOF BATHROOM SOAP DISPENSER
Our dispenser is armed with an IPX6 waterproof system, making it work well for your kitchen and bathroom. our dispenser is designed to last, no matter how wet.are you ready to embrace durable soap dispenser?

FAQ
This soap dispenser works, but no foam,how should i do?
1.Check Power Supply
"Ensure the dispenser is properly charged. For first-time use, charge it fully before operating."
2.Verify Switch Status
"Make sure the dispenser is switched on—look for a steady or blinking light to confirm activation."
3.Inspect for Blockages
"If foam isn’t dispensing, check if the soap path is blocked and clear any obstructions."
4.Sensor Functionality
"Place your hand directly under the sensor at the recommended distance (usually 2–4 inches)."
5.Seek Support
"If issues persist after troubleshooting, we provide further assistance within 24 hours."




















