Luney High Pressure Air Toilet Plungers With Visual Barometer
How High Pressure Toilet Plungers Work
Lueny high-pressure air plungers for toilet uses the principle of turbocharging to compress air into the storage cylinder by manually pumping the air. The turbocharging gives the toilet unclogger surging power to compress the air, which is instantly released by pressing the button, creating a huge impulse to quickly flush away the blockage in the pipes
Use Of Accessories:
- For Toilet
- For Kitchen Sink
- For Floor Drain
- For Washbowl
- Adaptor
- Inflator Cushion
Installation & Operation Procedure-1:
Step 1: Before installing, please check that the “beige fittings” are installed and oriented correctly!
Step 2: After inspection install and tighten the fittings (including the handle) in the order shown in the diagram.
Step 3: After the handle is installed, install the foot pedal.
Step 4: Place the footrests on the floor and press the footrests with both feet.
Step 5: Grip the handle up and down to pump quickly.
Note: Normal use of air pressure does not exceed 6bar (according to the use of the scene to determine the air pressure).
Step 6: After pumping, select the appropriate connector according to the use of the scene, connected and ready to use!
Installation & Operation Procedure-2:
Step 7: If it is an old straight toilet you can choose to install the adapter first and then connect the appropriate connector.
Step 8: The installation sequence using the adapter is shown in the figure ((1) is the adapter; (2) is the connector for unclogging the toilet, this accessory can be replaced according to the usage scenario). After completing the connection on the picture, it can be used.
Attention:
Use the adapter to connect the need to leave a certain amount of space to move, do not screw too tight! Swinging the connection of the fittings with your hand can be slightly movable that is correct.
Step 9: Installation method of the adapter: First, remove the (1) connector nut of the adapter and put it into the toilet plunger, then connect the remaining(2) connectors of the adapter to the (1) connector and tighten it.
Step 10: Correct placement method: When unclogging the toilet, the head of the toilet must not be plugged too far forward, all plugged in after the need to carry out the action of pulling back and ensure that the toilet plug against the front and back (the correct placement posture refer to the picture shown).
Step 11: Final Step: Once correctly placed you can press the pressure release button and unclog.
Step 12: Comparison of results before and after use.
Our high pressure air drain blaster gun comes with a real-time visual air pressure gauge, so you can choose the right pressure for the scenario you're unclogging
Recommendation:
1-2bar: which is normal air pressure
2-3bar: applies to washbasin
3-4bar: applies to kitchen sink
4-5bar: applies to floor drain
5-6bar: applies to toilet
7-8bar: High air pressure
Note: This recommendation is a test data! Please add more air pressure if there is a situation where you can't unclog the toilet completely, and please choose the air pressure according to your specific needs
Precautions For Froduct Use
1. When installing, please pay attention to the correct assembly of the accessories and make sure the installation direction is correct
2. The toilet plungers clog remover tool can be tilted at 45° when unclogging, and the effect is better when it fits with the toilet wall
3. Do not point the air outlet at the mouth, nose, ears and eyes
4. If the pipe is half-blocked, it is recommended to put some paper towels and sundries to make the pipe close to fully blocked, so that the effect is better
5. The outlet of the plug needs to be submerged in the blocked fluid medium to work more effectively
6. Try not to use it more than 10 times in a row so as not to damage the machine due to high temperature. Allow to dry for 30 minutes or more before use
7. The first use of this product is recommended to cover with other items, so as not to splash water to themselves
8. Special reminder: minors should be accompanied by parental care when using
Luney High Pressure Air Toilet Plungers With Visual Barometer
How High Pressure Toilet Plungers Work
Lueny high-pressure air plungers for toilet uses the principle of turbocharging to compress air into the storage cylinder by manually pumping the air. The turbocharging gives the toilet unclogger surging power to compress the air, which is instantly released by pressing the button, creating a huge impulse to quickly flush away the blockage in the pipes
Use Of Accessories:
- For Toilet
- For Kitchen Sink
- For Floor Drain
- For Washbowl
- Adaptor
- Inflator Cushion
Installation & Operation Procedure-1:
Step 1: Before installing, please check that the “beige fittings” are installed and oriented correctly!
Step 2: After inspection install and tighten the fittings (including the handle) in the order shown in the diagram.
Step 3: After the handle is installed, install the foot pedal.
Step 4: Place the footrests on the floor and press the footrests with both feet.
Step 5: Grip the handle up and down to pump quickly.
Note: Normal use of air pressure does not exceed 6bar (according to the use of the scene to determine the air pressure).
Step 6: After pumping, select the appropriate connector according to the use of the scene, connected and ready to use!
Installation & Operation Procedure-2:
Step 7: If it is an old straight toilet you can choose to install the adapter first and then connect the appropriate connector.
Step 8: The installation sequence using the adapter is shown in the figure ((1) is the adapter; (2) is the connector for unclogging the toilet, this accessory can be replaced according to the usage scenario). After completing the connection on the picture, it can be used.
Attention:
Use the adapter to connect the need to leave a certain amount of space to move, do not screw too tight! Swinging the connection of the fittings with your hand can be slightly movable that is correct.
Step 9: Installation method of the adapter: First, remove the (1) connector nut of the adapter and put it into the toilet plunger, then connect the remaining(2) connectors of the adapter to the (1) connector and tighten it.
Step 10: Correct placement method: When unclogging the toilet, the head of the toilet must not be plugged too far forward, all plugged in after the need to carry out the action of pulling back and ensure that the toilet plug against the front and back (the correct placement posture refer to the picture shown).
Step 11: Final Step: Once correctly placed you can press the pressure release button and unclog.
Step 12: Comparison of results before and after use.
Our high pressure air drain blaster gun comes with a real-time visual air pressure gauge, so you can choose the right pressure for the scenario you're unclogging
Recommendation:
1-2bar: which is normal air pressure
2-3bar: applies to washbasin
3-4bar: applies to kitchen sink
4-5bar: applies to floor drain
5-6bar: applies to toilet
7-8bar: High air pressure
Note: This recommendation is a test data! Please add more air pressure if there is a situation where you can't unclog the toilet completely, and please choose the air pressure according to your specific needs
Precautions For Froduct Use
1. When installing, please pay attention to the correct assembly of the accessories and make sure the installation direction is correct
2. The toilet plungers clog remover tool can be tilted at 45° when unclogging, and the effect is better when it fits with the toilet wall
3. Do not point the air outlet at the mouth, nose, ears and eyes
4. If the pipe is half-blocked, it is recommended to put some paper towels and sundries to make the pipe close to fully blocked, so that the effect is better
5. The outlet of the plug needs to be submerged in the blocked fluid medium to work more effectively
6. Try not to use it more than 10 times in a row so as not to damage the machine due to high temperature. Allow to dry for 30 minutes or more before use
7. The first use of this product is recommended to cover with other items, so as not to splash water to themselves
8. Special reminder: minors should be accompanied by parental care when using