Cayken SCY-18-2EBM 5in. Wet and Dry Core Drill Rig and 400F Stand

The Cayken 18-2EBM handheld drill is designed for wet or dry core drilling and comes with the Cayken 400F adjustable aluminum stand. This drill will cut up to 5-inch holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. The 18-2EBM has a variable-speed motor with 2.5 HP and two (2) gears. Spline is 16 mm x 2.0 and includes spline adapter. Drill features safety clutch and overload protection. Package includes 48 mm adapter collar to attached drill to stand, carrying case, wrench, two (2) motor brushes, and 1/4-inch water valve with shut off.

Drill Specifications:

• Brick Drilling Range: 5 in.


• Concrete Drilling Range: 3 in.


• Motor Specs: 2.5 HP, 110 V, 60 Hz, 1,900 W


• Variable speed with Two Gears: 700 RPM; 1050 RPM


• Spline: 16 mm x 2.0


• Spline Adapter: 16 mm x 2.0 Box to 1-1/4 in. x 7 TPI Male


• Weight: 11 lbs.

Features:

• Designed for wet or dry core drilling.


• Will cut up to 5-inch diameter holes.


• For use on concrete, brick, stone, rock, ceramic, and fireproof materials.


• 1/4-inch water valve for wet drilling.


• Stepless speed regulation.


• Soft start electronic current limiter.


• Includes 48 mm adapter collar to attach drill to stand.


• Includes carrying case and wrench.


• CE/ROHS/ISO90001 Certified.


• Drill bit not included.

Stand Specifications

• Adjustable aluminum stand for drilling at 0 to 45 degrees.


• Built-in leveling bubble.


• Four (4) adjustable slide bearings.


• Angle/vertical position locks.


• Larger mast designed to accommodate large-diameter bits and withstand high torque.


• Four (4) leveling bolts on base.


• Reversible slide handle for dual-side operation.


• Top and rear handles.


• 4-1/2-inch rolling wheels.


• Includes wrench set.


• Weight: 34 lbs.