2-in-1 Stud Finder with Laser Level, Rechargeable Cross Line Laser | Multi Surface Lazer Leveler Wall Stud Scanners Tool for Hanging Frame & Picture, Wood Ac Wire Metal Stud Joist Pipe Detection

Calibration is required before using the stud finder function. This laser level is manual-leveling, not self-leveling. Please utilize the two bubble vials for accurate horizontal, vertical, and cross lines. The two bubble vials operate and illuminate only when the Laser Mode is active, not in the detection mode. Self-adhesive strips are not appropriate for dusty, coarse surfaces, wallpaper, or drywalls, etc. Replace the strips if they are soiled or have lost their adhesion. This is a Class II laser safety product, with an output of less than 1mW.

Note: This tool is NOT intended for use on LATH and PLASTER WALLS. It performs best on DRYWALL and WOOD WALLS. Keep the red detection button on the left side pressed throughout the scanning process. One Tool for
Two Jobs: This multifunctional device integrates a rechargeable stud finder and a line laser level, providing two key functions in one compact unit.
PACKAGE: 1 × Rechargeable 2-in-1 Stud Finder with Laser Level, 1 × Type-C Charging Cable, 1 × 360° Wall Mount with 2 Pins, 6 × Self-Adhesive Strips, 1 × Portable Storage Bag.
Easy & Automatic Edge Marking: In Stud Finder Mode, the tool automatically projects the upper vertical laser line upon locating a stud edge. Simultaneously, the top LED indicators turn red and an audible alert sounds, offering visual and audio cues for simple and precise edge marking. Repeat the same procedure from the left or right side to determine the stud's exact position.
Multi-Surface Laser Level: This is a manual-leveling laser level, not self-leveling. The two illuminated bubble vials assist you in manually adjusting horizontal, vertical, or cross-lines, but only when the device's back is flush against the wall or floor and the bubbles are centered. LED bubble vials offer extra visibility in dimly lit areas and allow for a 180° visual reference. The laser's effective range is typically up to 10m/30ft for indoor applications. Three Fixing Methods for
Multi-Surfaces: The 360° rotating wall mount allows for adaptable positioning and hands-free marking.
Three Fixing Methods: 2 pins for rough surfaces; 6 self-adhesive strips for smooth surfaces (not suitable for dusty, coarse, wallpapered, or drywall surfaces); a top pin hole for hard surfaces and other general purposes. Stud Finder with Wood & Metal & AC Wire Detection: Precisely locates wood and metal studs up to 3/4 inch deep behind drywall, and AC wires up to 1-1/2 inch deep. It notifies you of live AC wires. When a stud edge is detected, the upper vertical laser line is projected automatically, the top LEDs glow red, and an audible signal sounds for straightforward edge marking. Repeat the same detection steps from the left or right side to pinpoint the stud's exact location.
Multi-Function & Wide Use: This 2-in-1 Stud Finder with Laser Level is a versatile and dependable tool that can enhance efficiency in construction and decoration projects. It is a suitable tool for DIY enthusiasts and decorators, excellent for various indoor tasks such as hanging pictures, mounting shelves, installing frames, and locating wood and metal studs as well as live AC wires