Steel Dragon Tools® 7pc. Tungsten Carbide Tipped Annular Cutter Kit 1-3/8" Depth and 9/16 in. to 1-3/8 in.

The Steel Dragon Tools® 7-piece carbide-tipped annular cutter kit includes six (6) annular bits and two (2) pilot pins. These bits will quickly and safely cut holes in steel. The bits have a 1-3/8-inch cutting depth with a 3/4 in. Weldon shank. Bit sizes included: 9/16 in., 11/16 in., 13/16 in., 15/16 in., 1-1/16 in., 1-3/16 in.

Features:

• Steel Dragon Tools® annular cutters will drill large holes up to ten times faster than regular drills bits.


• Machine-finish hole with no reaming needed when using lubricant.


• Make overlapping holes, slotting holes, and edge cuts.


• Bit size is etched on each cutter.


• Pilot pin helps locate center of hole location.


• Pilot pin helps eject slug after drilling is complete.


• During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.

Specifications:

• Kit includes six (6) carbide-tipped annular cutters and two (2) pilot pins.


• Bit sizes included: 9/16 in., 11/16 in., 13/16 in., 15/16 in., 1-1/16 in., 1-3/16 in.


• Cutting Depth: 1-3/8 in.


• 3/4 in. Weldon Shank


• Pilot Pin: 1/4 in. x 3-1/2 in. (6.34 mm x 90 mm)


• Pilot Pin: 5/16 in. x 3-1/2 in. (7.98 mm x 90 mm)


• Includes carrying case.