10 Pack VF3502 Size A High Efficiency Heavy Duty Dust Filter Bags Fit RIDGID 12-16 Gallon Wet/Dry Vacuums Models# WD14500 HD12000 HD14000 HD16400 HD18000 WD12701, No Reduced Suction

Contains 23743 VF3502 dust collection bags, 10 PCS, compatible with RIDGID 12 - 16 gallon shop vacuums and size A dust bags. Dry pick-up only. Dimensions of each bag when spread out: 36-3/5" (930 mm) long x 15-3/5" (400 mm) high, with a 3" (77 mm) fitting diameter.
Compatibility: Fit 12
Gallon models: HD1200, HD1280, MOB1200, WD12701, 50323 (1200RV), and 50333 (1250RV).
Fit 14 Gallon models: HD1400, HD1402C, WD1450, 50348 (1400RV), 50368 (RV2400HF), and 50358 (RV2400A).
Fit 16 Gallon models: HD1600, HD1640, HD1800, MOB1600, WD1640, WD1680, WD1851, WD1850, WD1950, WD1956, RT16000, 50353 (1610RV), 50343 (1620RV), 50338 (RV1650), and 50363 (RV2600B). Not compatible with 12 gallon vacuums WD12000, WD12450, WD12460, WD1250, WD12780, and WD1280. Not compatible with 16 gallon vacuums WD1625, WD16350, WD16360, WD1637, WD16650, and WD17351. These bags fit only vacuums with a nozzle and do not fit vacuums with a hose connection in the top. Double-Layer Construction The outer layer is made from FSC-Certified virgin woodpulp paper with no recycled materials. The inner meltblown nonwoven layer is made from polypropylene composite, providing higher tear resistance than standard media and 99% filtration efficiency for particles >= 0.03 micrometers. The bags help maintain the vacuum interior and allow hygienic dirt disposal. They hold industrial dust, including drywall and woodworking dust, household dirt such as pet dander and hair, and other non-hazardous materials captured by the vacuum. This helps improve cartridge filter effectiveness. Dirt enters from the top, deposits at the bottom, accumulates upward, and air exits through the sides, allowing unimpeded airflow as the bags fill.

When full, the bags can be tightly sealed with the round cardboard to help prevent dust from escaping during removal and disposal. For non-toxic, dry, non-flammable materials only. Do not reuse dust bags. Replace the bags when they are about two-thirds full to maintain vacuum performance. Depending on usage frequency, replacement may be needed every few weeks or monthly. Regular bag changes help maintain suction power, prevent unpleasant odors, and support thorough cleaning. Installation Align the dust bag collar with the inlet, press the collar against the shop vacuum drum, and remove it by popping the collar out from the inlet