
Fanttik B10 Pro Max
Merchant Video
Where It Works
Specifications
Functions

Backup Power Bank

LED Light Illumination
How to Power On/Off and Switch Speed Levels?
Hold the power button for a few seconds to turn on. Press the two buttons above it to adjust the speed level. The LED display shows the current speed level and battery.
Hold the “Max” button below the air outlet for Max Mode.
Safety Notes
Keep away from hair.
Avoid large dust or debris entering the air inlet or outlet to prevent motor damage.
Regularly remove the attachments from the air outlet and inlet after use.
Why does the charging speed slow down after reaching 90%?
During charging, at 8.1V it shows 90% and enters trickle mode. At 8.4V with current below 100mA, it shows 100%.
Charging takes 1.5–2 hours. Trickle charging is safer, cooler, and extends battery life.
I feel air leaking when using with the nozzles attached. Is this a sealing issue?
No. The design uses vent openings for heat dissipation and overheating protection.
Due to the compact body, some air overflow may occur at high airflow, so it is not a sealing problem.
Precautions when using the swimming ring blow nozzle for Inflation
Must be kept at gear 2 or below to avoid triggering the overheat protection.
If the device overheats, stop operation immediately and resume only after it has cooled down.
DIY Maintenance
Fanttik B10 Pro Max
Merchant Video
Where It Works
Specifications
Functions

Backup Power Bank

LED Light Illumination
How to Power On/Off and Switch Speed Levels?
Hold the power button for a few seconds to turn on. Press the two buttons above it to adjust the speed level. The LED display shows the current speed level and battery.
Hold the “Max” button below the air outlet for Max Mode.
Safety Notes
Keep away from hair.
Avoid large dust or debris entering the air inlet or outlet to prevent motor damage.
Regularly remove the attachments from the air outlet and inlet after use.
Why does the charging speed slow down after reaching 90%?
During charging, at 8.1V it shows 90% and enters trickle mode. At 8.4V with current below 100mA, it shows 100%.
Charging takes 1.5–2 hours. Trickle charging is safer, cooler, and extends battery life.
I feel air leaking when using with the nozzles attached. Is this a sealing issue?
No. The design uses vent openings for heat dissipation and overheating protection.
Due to the compact body, some air overflow may occur at high airflow, so it is not a sealing problem.
Precautions when using the swimming ring blow nozzle for Inflation
Must be kept at gear 2 or below to avoid triggering the overheat protection.
If the device overheats, stop operation immediately and resume only after it has cooled down.
DIY Maintenance
![]() B10 Pro Max | ![]() B10 Pro | ![]() E2 Ultra | ![]() S2 Pro | ![]() E1 Max | ![]() S1 Pro |
|---|---|---|---|---|---|
| Customer Reviews | |||||
| — | — | — | — | — | — |
| Price | |||||
| — | — | — | — | — | — |
| Suitable For | |||||
| PC/Keyboard/Workbench/Outdoor | PC/Keyboard/Electronics | Small Appliances/PC/RC/Camera | Desktop/DIY/Furniture Repair | Camera/Watch/Precision Repair | Desktop/DIY/Furniture Repair |
| Battery Capacity | |||||
| 2×4000 mAh | 2×2400 mAh | 800 mAh | 2000 mAh | 350 mAh | 2000 mAh |
| Speed | |||||
| 130000 RPM | 110000 RPM | 270 RPM | 250 RPM | 200 RPM | 220 RPM |
| Gear | |||||
| 6-Speed adjustable | 3-Speed adjustable | 0.05/0.1/0.2/0.4/0.6 N·m | 0.5/1/2/3/4/5/6/8 N·m | 0.05/0.2 N·m | 1.5/3/4.2/6 N·m |
| LED Light | |||||
| ? | ? | ? | ? | ? | ? |






















































