
Product Parameter :

- It can support WS2812B and WS2813 but there is no option on the setting page. Please select WS2811 IC chip.when you control WS2812B and WS2813 LED strip. When connecting WS2813 or WS2815 LED strip, please connect Bi wire to GND port.

APP Control


2PIN ~ 6PIN LED Controller
2.4GHZ WiFi / Bluetooth Mesh/ ZigBee 3.0 Controller
Working Voltage: DC5V/ DC12V/ DC24V
Only Indoor Use

Product Parameter :
| Name : | BTF-LIGHTING SP107E Addressable LED Music Controller |
|---|---|
| Working voltage: | DC5V~24V (voltage depends on the led strip that you use) |
| Max Control pixels: | Control up to 960 Pixels |
| Remote distance: | 20 Meters |
| Working temperature : | -20?~60? |
| Product size: | 85mm*45mm*22mm |
| Package List : | 1x SP107E music controller, 1x 3pin JST connector, 1x Female DC connector, 1x 1 to 2 Audio cable, 1x Mini screw driver . |
| Support LED IC : | Supports RGB IC types .Such as FCOB RGB WS2811 IC, WS2812B,WS2811,WS2813,WS2815,SK6812RGB,SK6812-RGBW, APA102, WS2801,SK9822, LPD8806 etc strip light .WS2812B 8X8 ,8X32 ,16X16 ,22X22 LED matrix . |
| NOTE : | The controller cannot regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your led lights. If your lights need 5V input, please use a 5V power supply, never use 12V or 24V power supply. |

- It can support WS2812B and WS2813 but there is no option on the setting page. Please select WS2811 IC chip.when you control WS2812B and WS2813 LED strip. When connecting WS2813 or WS2815 LED strip, please connect Bi wire to GND port.

APP Control

2PIN ~ 6PIN LED Controller
2.4GHZ WiFi / Bluetooth Mesh/ ZigBee 3.0 Controller
Working Voltage: DC5V/ DC12V/ DC24V
Only Indoor Use

















































