DAP Touch 'n Foam Professional Window & Door Polyurethane Foam Sealant: 20.0 oz. (White) - OEM

DAP Touch 'n Foam Pro Window & Door Insulating Polyurethane Foam Sealant is a one-component polyurethane foam sealant that dispenses a low pressure formula that is guaranteed to not warp or bow window or door frames and jambs. For use with gun foam applicators for greater control and adjustable output.

Preparation: To promote adhesion surface must clean, dry, and free of all foreign material. For easy attachment to foam applicator gun, apply petroleum jelly to the gun basket before screwing on can.

Application: For best results this product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap no more than 1/4 full, allowing room for expansion.

Can Replacement: While pointing the gun in a safe direction, depress trigger and quickly remove empty can. Spray basket with polyurethane foam cleaner and immediately replace with a new can of foam to prevent foam from hardening in the gun

Clean-up: If wet foam contacts skin, clean immediately with a dry rag do not use water water accelerates curing. Cured foam must be removed mechanically from surfaces.

Storage/Re-Use: Turn guns flow control knob to closed position and store can in upright position (with gun still attached). To restart, shake well for 30 seconds, turn flow control knob to open position and dispense foam.