Keep Your Home Warm and Energy-Efficient
Weather Stripping Door Seal
Merchant VideoHighly durable and made from premium silicone, this weatherstrip remains flexible and intact even in extreme weather. With a reinforced adhesive, it stays firmly attached, even in freezing temperatures, ensuring long-lasting performance throughout the winter season


How to Install a Weather Stripping Door Seal
Step 1: Clean the Installation Surface:Clean and dry the door or window frame where you will apply the weather stripping.
Note:If the surface is not thoroughly cleaned, the adhesive may not stick properly, leading to peeling or reduced effectiveness.
Step 2: Measure and Cut to Fit:Unroll the weather stripping and measure the length you need for the door or window.
Step 3: Apply the Seal:Peel off the adhesive backing slowly, starting from one end. Align the seal with the edge of the door, window, or frame.
Step 4: Trim Excess and Final Pressing:After applying the seal, trim any excess material with scissors to ensure a clean and flush fit.
Additional Installation Tips:
For corners and curves: If you're sealing around a window or door with curves or corners, carefully align the seal along the contour and press firmly to prevent any gaps.
Temperature considerations:Optimal installation temperature is above 50°F (10°C). If installing in lower temperatures, be sure to use a hair dryer to slightly heat the adhesive strips to ensure adhesion.
Wait before testing: Allow the adhesive to bond for at least 12-24 hours before testing the door or window to ensure the best performance.
By following these steps and choosing the right door or window type, you will enjoy long-lasting protection, keeping your home safe from cold air, moisture, and dust while improving energy efficiency and comfort.
3 different widths and 3 stylish colors
![]() 1.4in Width for Medium Gaps | ![]() 1.8in Width for Large Gaps | ![]() 1.0in Width for Small Gap |
|---|---|---|
1.4in Weather Stripping Ideal for gaps up to 0.8 inches, it blocks cold drafts & dust from entering home | 1.8in Width for Large Gaps For sealing gaps up to 1.2 in, providing maximum protection against cold air. | 1.0in Width for Small Gap Perfect for gaps up to 0.6 inches, providing an airtight seal for narrow spaces. |
Thick Silicone for Winter 100% silicone stays flexible in cold temperatures, unlike PVE that hardens | Thick Silicone for Winter 100% silicone stays flexible in cold temperatures, unlike PVE that hardens | Thickened 100% Silicone Unlike PVE, our silicone stays flexible and durable, especially in cold weather. |
Reinforced Adhesive The strong adhesive stays securely attached even in extreme cold. | Reinforced Adhesive The strong adhesive stays securely attached even in extreme cold. | Reinforced Adhesive Ensures a strong bond, even in winter’s coldest days, preventing detachment. |
Versatile Applications Ideal for doors, windows, garage doors, and more, especially for winter sealing. | Versatile Applications Cut to fit and apply to doors, windows, garage doors, and more. | Versatile Applications Ideal for doors, windows, garage doors, and more, especially for winter sealing. |
Does it turn white/brittle in extremely cold weather?
No, high-quality 100% silicone seals, like those used in Wigtda products, are designed to stay flexible even in extreme cold, unlike PVE, which can become brittle or harden.
Can it be used on sliding doors/windows?
Yes, weather stripping can be used effectively on sliding doors and windows, sealing gaps while still allowing smooth movement.
Is it compatible with all door/window types?
Yes, Wigtda weather strips are versatile and compatible with most door and window types, including wood, metal, glass, and sliding models.
Is adhesive backing easily removable without damage?
No residue will be left behind when removing the seal. Wigtda uses reinforced adhesive backing that is both strong and cleanly removable without damaging surfaces, ensuring a seamless application and removal process.
Does its color fade over time with exposure?
No, high-quality silicone seals are typically UV-resistant and don’t fade over time, maintaining their appearance even with prolonged exposure to sunlight or harsh conditions.

Weather Stripping Door Seal
Keep Your Home Cozy and Energy Efficient All Year Round!
Weather Stripping Door Seal
Keep Your Home Cozy and Energy Efficient All Year Round!
Keep Your Home Warm and Energy-Efficient
Weather Stripping Door Seal
Merchant VideoHighly durable and made from premium silicone, this weatherstrip remains flexible and intact even in extreme weather. With a reinforced adhesive, it stays firmly attached, even in freezing temperatures, ensuring long-lasting performance throughout the winter season


Available in 3 widths and colors, Seals blend smoothly with any décor and door or window style.
How to Install a Weather Stripping Door Seal
Step 1: Clean the Installation Surface:Clean and dry the door or window frame where you will apply the weather stripping.
Note:If the surface is not thoroughly cleaned, the adhesive may not stick properly, leading to peeling or reduced effectiveness.
Step 2: Measure and Cut to Fit:Unroll the weather stripping and measure the length you need for the door or window.
Step 3: Apply the Seal:Peel off the adhesive backing slowly, starting from one end. Align the seal with the edge of the door, window, or frame.
Step 4: Trim Excess and Final Pressing:After applying the seal, trim any excess material with scissors to ensure a clean and flush fit.
Additional Installation Tips:
For corners and curves: If you're sealing around a window or door with curves or corners, carefully align the seal along the contour and press firmly to prevent any gaps.
Temperature considerations:Optimal installation temperature is above 50°F (10°C). If installing in lower temperatures, be sure to use a hair dryer to slightly heat the adhesive strips to ensure adhesion.
Wait before testing: Allow the adhesive to bond for at least 12-24 hours before testing the door or window to ensure the best performance.
By following these steps and choosing the right door or window type, you will enjoy long-lasting protection, keeping your home safe from cold air, moisture, and dust while improving energy efficiency and comfort.
3 different widths and 3 stylish colors
Does it turn white/brittle in extremely cold weather?
No, high-quality 100% silicone seals, like those used in Wigtda products, are designed to stay flexible even in extreme cold, unlike PVE, which can become brittle or harden.
Can it be used on sliding doors/windows?
Yes, weather stripping can be used effectively on sliding doors and windows, sealing gaps while still allowing smooth movement.
Is it compatible with all door/window types?
Yes, Wigtda weather strips are versatile and compatible with most door and window types, including wood, metal, glass, and sliding models.
Is adhesive backing easily removable without damage?
No residue will be left behind when removing the seal. Wigtda uses reinforced adhesive backing that is both strong and cleanly removable without damaging surfaces, ensuring a seamless application and removal process.
Does its color fade over time with exposure?
No, high-quality silicone seals are typically UV-resistant and don’t fade over time, maintaining their appearance even with prolonged exposure to sunlight or harsh conditions.
































