REPTIZOO smart dimming thermostat has highly accurate & precise sensor which can sensitively detect the real-time temperature and make adjustments, this smart PID heating mode is more stable and efficient. It’s perfect for light bulbs, and also suitable for other heaters.
How they Work: The temperature is controlled by increasing or decreasing power to the heater incrementally. If the temperature in the vivarium is too warm it supplies less power and so the light will dim. If it is too cool then the stat will supply more power, therefore brightening the bulb to provide more heat.
Operating instructions
- Attach your heating device to this product
- Connect this product to your electrical supply and switch on.
- Place the temperature probe in the location that requires monitoring
- For selecting Fahrenheit or Celsius: please hold down both the up/down arrows until it switched.
Temperature setting
- To set the temperature required press and hold the set button for 3 second, you will see the last digit of the display start flashing
- Press either the buttom up or down to increase or decrease the temperature as required.
- Press set again to store the temperature and exit the setting model
- If not selected the device will store automatically after 15 second
Tips
- Temperature control range: 5? to 60? (41°F to 140°F);
- Temperature control output: Max 300W
- Resolution: 0.1°C/ 0.1°F ;Accuracy: ±1°C/ ±2°F
- Attention: Can not load sunlamp and energy-saving lamps
Temperature Warning Alarm
1. In normal working model, if the temperature should drop blow 0?, the device will display LL
2. If the temperature higher than 60?, the device will display HH
3. If the temperature drop lower than the stored setting by 3? or more with no press on the button , the device will flash
Temperature Sensor
1. Temperature sensor, accurately control Temperature
2. Temperature control range: 20? to 50? (68°F to 122°F)
ON/OFF Function
Double-press the 'SET' button to turn on/off the reptile thermostat.
This smart dimming thermostat has power-off memory function, no need to set the device every time.
THE REPTILES EXPERT FOR YOU
REPTIZOO is a leading brand specializing in design, manufacturing and selling of reptile equipments since the year of 2007.
Reptile Heat Lamp
Reptile Terrarium
Controller Equipment
Turtle Supplies Series
Humidify & Feeder & Hide & Toy
REPTIZOO smart dimming thermostat has highly accurate & precise sensor which can sensitively detect the real-time temperature and make adjustments, this smart PID heating mode is more stable and efficient. It’s perfect for light bulbs, and also suitable for other heaters.
How they Work: The temperature is controlled by increasing or decreasing power to the heater incrementally. If the temperature in the vivarium is too warm it supplies less power and so the light will dim. If it is too cool then the stat will supply more power, therefore brightening the bulb to provide more heat.
Operating instructions
- Attach your heating device to this product
- Connect this product to your electrical supply and switch on.
- Place the temperature probe in the location that requires monitoring
- For selecting Fahrenheit or Celsius: please hold down both the up/down arrows until it switched.
Temperature setting
- To set the temperature required press and hold the set button for 3 second, you will see the last digit of the display start flashing
- Press either the buttom up or down to increase or decrease the temperature as required.
- Press set again to store the temperature and exit the setting model
- If not selected the device will store automatically after 15 second
Tips
- Temperature control range: 5? to 60? (41°F to 140°F);
- Temperature control output: Max 300W
- Resolution: 0.1°C/ 0.1°F ;Accuracy: ±1°C/ ±2°F
- Attention: Can not load sunlamp and energy-saving lamps
Temperature Warning Alarm
1. In normal working model, if the temperature should drop blow 0?, the device will display LL
2. If the temperature higher than 60?, the device will display HH
3. If the temperature drop lower than the stored setting by 3? or more with no press on the button , the device will flash
Temperature Sensor
1. Temperature sensor, accurately control Temperature
2. Temperature control range: 20? to 50? (68°F to 122°F)
ON/OFF Function
Double-press the 'SET' button to turn on/off the reptile thermostat.
This smart dimming thermostat has power-off memory function, no need to set the device every time.