Your Browsing History
- Free 30-day Returns
$232.00
Meet Your Seller
2M Pipeline Instrument Pipe Blockage Detector Scanner 512hz Receiver Locator Kit
- Specification:
- Transmitter Technical Parameters:
- Material: ABS
- Plug Voltage: 100-240V
- Plugging Tester Power Supply: 1 x 1500mAh Battery (built in battery)
- Frequency:512 Hz
- Cable Length: Approx. 30 meter
- Sensing Area: about 2 meter
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
In the construction process, PVC pipes and metal wire pipes are often blocked due to various reasons, and the wire box cannot be found. The location of the blockage point is difficult to determine, and the excavation area is large, causing high labor intensity for workers and even damaging the structure, which consumes a lot of manpower and financial resources. This instrument adopts the principle of microwave emission and is affected by external inductive interference. It can be used in PVC pipes and any electrical wires with a length of more than 50 centimeters.
A about 2 meter thick wall can clearly find the blockage point and and remind you through a buzzer. It has a fast search speed, simple operation, stable performance, low power consumption, long service life, and labor-saving for maintenance without dismantling the pipeline.
Product Description:
1.
WATERPROOF PROBES: The pipeline blockage detector is equipped with 4 waterproof probes, which can cope with various environments and has a long service life.
2.
ACCURATE LOCATING: This kit is mainly used to accurately locate the location of pipeline blockages and remind you through a buzzer, stable and reliable.
3.
ABS HOUSING: The blockage tester shell is made of excellent ABS material, which is impact resistant, scratch resistant, and does not deform.
4.
DETECTABLE PIPES: The pipeline blockage scanner is suitable for detecting steel, iron, and PVC pipeline, to prevent large scale blockage of pipelines.
5.
RECEIVER: The receiver has a built-in induction coil to receive the magnetic signal from the pipeline, and the coil generates an induced current to calculate the direction and position of the transmitter.
There are two receiving modes: Far
(note: about 2M) and
Near (note: about 50 centimeter). Then adjust the sensitivity knob, peak mode (maximum) or null mode (minimum) to locate the transmitter.
Specification:
Transmitter Technical Parameters:
Material: ABS
Plug Voltage: 100-240V
Plugging Tester Power Supply: 1 x 1500mAh Battery (built in battery)
Frequency: 512 Hz
Cable Length: Approx. 30 meter
Sensing Area: about 2 meter
Receiver Technical Parameters:
Receiver Frequency: 512HZ
Display Size: 2 inches
Power consumption: <3W
Distance: about 2m
Battery: 3.7V 3000MAH built-in lithium battery
Charger: 5V1A
Charger time: about 6 hours
Battery Indicator: 3 gear, it is flashing when battery is low
Battery working time: about 10 hours
Signal strength: 6 gear
SpeakerSupport
Detect Mode: Far/ Near
Package List:
1 x Plugging Tester
1 x Receiver
4 x Probes
4 x Probe Protection Cases
4 x Probe Sleeves
4 x Heat Shrink Tubes
4 x Diodes
1 x Charger
2 x Connection Wire
1 x Red handle
1 x User Manual (English)
A about 2 meter thick wall can clearly find the blockage point and and remind you through a buzzer. It has a fast search speed, simple operation, stable performance, low power consumption, long service life, and labor-saving for maintenance without dismantling the pipeline.
Product Description:
1.
WATERPROOF PROBES: The pipeline blockage detector is equipped with 4 waterproof probes, which can cope with various environments and has a long service life.
2.
ACCURATE LOCATING: This kit is mainly used to accurately locate the location of pipeline blockages and remind you through a buzzer, stable and reliable.
3.
ABS HOUSING: The blockage tester shell is made of excellent ABS material, which is impact resistant, scratch resistant, and does not deform.
4.
DETECTABLE PIPES: The pipeline blockage scanner is suitable for detecting steel, iron, and PVC pipeline, to prevent large scale blockage of pipelines.
5.
RECEIVER: The receiver has a built-in induction coil to receive the magnetic signal from the pipeline, and the coil generates an induced current to calculate the direction and position of the transmitter.
There are two receiving modes: Far
(note: about 2M) and
Near (note: about 50 centimeter). Then adjust the sensitivity knob, peak mode (maximum) or null mode (minimum) to locate the transmitter.
Specification:
Transmitter Technical Parameters:
Material: ABS
Plug Voltage: 100-240V
Plugging Tester Power Supply: 1 x 1500mAh Battery (built in battery)
Frequency: 512 Hz
Cable Length: Approx. 30 meter
Sensing Area: about 2 meter
Receiver Technical Parameters:
Receiver Frequency: 512HZ
Display Size: 2 inches
Power consumption: <3W
Distance: about 2m
Battery: 3.7V 3000MAH built-in lithium battery
Charger: 5V1A
Charger time: about 6 hours
Battery Indicator: 3 gear, it is flashing when battery is low
Battery working time: about 10 hours
Signal strength: 6 gear
SpeakerSupport
Detect Mode: Far/ Near
Package List:
1 x Plugging Tester
1 x Receiver
4 x Probes
4 x Probe Protection Cases
4 x Probe Sleeves
4 x Heat Shrink Tubes
4 x Diodes
1 x Charger
2 x Connection Wire
1 x Red handle
1 x User Manual (English)
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by RuiShiDa Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...