

W1209 Temperature Controller Module:
- Model: W1209 with Case
- Input Voltage: DC 12V
- Temperature Sensor Type: NTC(10K 0.5%) Waterproof Sensor
- Stable Performance, Good Consistency

W1209 Digital Temperature Controller
Specification:
- Type: Digital Thermostat
- Display Type: 0.28inch 3-Bit Digital Tube
- Resolution: 0.1 (9.9~99.9), 1 (other)
- Refresh Frequency: 0.55s
- Return Difference Accuracy: 0.1
- Output: 10A One-Channel Relay
- Static Current: 35MA
- Suction Current 65MA
Features:
- Embedded CPU Chip (MCU)
- Lower Power Consumption
- Automatic Power Set Memory
- Stability, Consistency and Reliability

NTC Probe:
XH-W1209 Micro Temperature Controller Equipped with NTC10K Waterproof Probe which Allows to Control the Temperature Even of Fluids,Allowing the Controlled Heated or Cooling

How to Setting:
Long Press SET for 5s to Get Menu, Starts at P0, Press +/- to Get Next P-Parameter, Press Set to Determine the P-Parameter, Press +/- to Set the Desired Value for the Selected Parameter, Press SET to Accept it, Long Press +/- Reset to Default

Application:
With W1209 Module, You Can Control Power to Most Types of Electrical Device Based On The temperature Sensed Intelligently by the Included High Accuracy NTC Temperature Sensor ,Widely Used for Incubation Temperature Control,Scientific Planting,etc.



W1209 Temperature Controller Module:
- Model: W1209 with Case
- Input Voltage: DC 12V
- Temperature Sensor Type: NTC(10K 0.5%) Waterproof Sensor
- Stable Performance, Good Consistency

W1209 Digital Temperature Controller
Specification:
- Type: Digital Thermostat
- Display Type: 0.28inch 3-Bit Digital Tube
- Resolution: 0.1 (9.9~99.9), 1 (other)
- Refresh Frequency: 0.55s
- Return Difference Accuracy: 0.1
- Output: 10A One-Channel Relay
- Static Current: 35MA
- Suction Current 65MA
Features:
- Embedded CPU Chip (MCU)
- Lower Power Consumption
- Automatic Power Set Memory
- Stability, Consistency and Reliability

NTC Probe:
XH-W1209 Micro Temperature Controller Equipped with NTC10K Waterproof Probe which Allows to Control the Temperature Even of Fluids,Allowing the Controlled Heated or Cooling

How to Setting:
Long Press SET for 5s to Get Menu, Starts at P0, Press +/- to Get Next P-Parameter, Press Set to Determine the P-Parameter, Press +/- to Set the Desired Value for the Selected Parameter, Press SET to Accept it, Long Press +/- Reset to Default

Application:
With W1209 Module, You Can Control Power to Most Types of Electrical Device Based On The temperature Sensed Intelligently by the Included High Accuracy NTC Temperature Sensor ,Widely Used for Incubation Temperature Control,Scientific Planting,etc.












