

This elegantly designed numeric keypad is the ideal accessory for security systems, significantly enhancing the keyless operation experience. It is suitable for homes, offices, courtyards, farms, ranches, warehouses, and other commercial/industrial locations.

Multiple Access Ways
Offers 4 working modes: “Code”, “ID Card”, "APP" and “Code + ID Card” (incl. 5-keyfobs,card type is 125KHz EM or ID card / tag).

IP68 Waterproof
Zinc alloy wlectroplated case, fully encapsulated in epoxy for superior protection.
Operation temperature: -49?~140?.

Backlit numeric keypad
Backlit keys (non-turn-off) ensures clear visibility of the keys in dark environments or at night.
The Red Yellow Green LED to indicate operation.

Package includes
Dimension: 4.6 x 2.2 inch (118 x 56mm)
- 1 x Metal Access Control;
- 5 x 125kHz RFID Keyfobs
- 1 x Installation Kit
- 1 x User Manual
| Operating Voltage | DC 12V |
| Operation Temperature | -49?~140? |
| Electric lock output | =1A |
| User Capacity | 2000 |
| Read Card Frequency | 125KHz EM-ID card |
| Card Reading Distance | 2 ~ 5 cm |
| Waterproof rate | IP68 |
| Keypad | Digital backlit |
| Unlck Access | Card; code; card+code |
| Unlock Door Relay Time | 0 to 99 seconds adjustable |
| Static electricity | =30mA |
| Humidity | 10% to 90% RH |
Is the garage sliding gate compatible with keypad?

It is compatible with the keypad
If your Garage/Gate Opener works with a wired Universal Wall Button, it is compatible with the keypad. The keypad works with the third-party gate opener or garage door opener whose control board accepts “Normally Open Dry Contact” signal for push button.

It is compatible with the keypad
If your Garage/Gate Opener control board would run by using a pliers or a jumper wire to short the terminals for push button momentary, it is compatible with the keypad. The keypad can be powered by 12V DC from the control board or external power source.
How does this keypad work?
The keypad uses contactless RFID and PIN code technology. It can be used as an multifunction standalone access controller, control an electronic door lock or garage, gate opener, or as a card reader to work with an access control system.
How is the keypad installed?
The keypad is made of metal casing with potting process and can be installed indoors and outdoors. Just screw it to the inside of the door or the same side of the control panel, wired to the electric lock or controller.
Does it still work without WiFi signal?
This is a wired keypad and will work without WIFI. All programming can be done from the keypad, no wifi or computer required. The keypad can be powered by 12VDC from the control board or external power source.
Can the keypad be connected to an Electric lock or exit button?
YES, Keypad be connected to Electric Lock, Exit Button, External Alarm(Not Incl.).
How many users and what cards does the keypad support?
Supports up to 2000 users with a choice of card, 4-digit code or card + code. Card reader supports 125KHZ EM-ID cards (some encrypted cards such as HID, Cobra, APCiK, etc. are not supported).
Security Access Control Keypad

This elegantly designed numeric keypad is the ideal accessory for security systems, significantly enhancing the keyless operation experience. It is suitable for homes, offices, courtyards, farms, ranches, warehouses, and other commercial/industrial locations.
More convenient and secure access control solution
This is a smart access control keypad featuring contactless proximity card technology, will prevent unwanted entry, ensuring multiple protection & safety.
Simply enter a short password or tap the card to open the gate without needing to carry a key.
Multiple users and multiple access methods enable a more convenient life.
Wide Compatibility
Keypad compatible with most brands of automatic swing sliding gate motor garage door openers (whose control board accepts “Normally Open Dry Contact” signal for push button).
It also works with magnetic lock, strike lock and access control systems.
Ideal for homeowners, visitors, or delivery access needs. You can add the keypad on the entrance, exit,gate.
Note: Models whose connection protocol is wireless Wi-Fi, Bluetooth, learn buttons, safety sensors, rolling code are not currently supported!
Simple setup, easy installation
Wired keypad support WiFi Tuya App, 2000 standard users, Tuya APP remotely control the keypad device and manage users, share, modify and delete passwords/ID cards. View access logs, and set temporary Code or permanent access from your phone anytime, anywhere. (Supports 2.4GHz Wi-Fi only — 5GHz Wi-Fi is not supported)
Powered by 12V DC power supply (not included), Easy DIY installation and programming in minutes.
Wired connection garage gate opener / magnetic lock
The keypad can be powered by 12VDC from the control board or external power source(not included).
Simply connect the blue and purple cables of the keyboard to effectively control the opening and closing of garage doors or gate lock.
Secure / normal Mode, NO / NC output, works with magnetic lock, strike lock and access control systems. (power support control not included)

Multiple Access Ways
Offers 4 working modes: “Code”, “ID Card”, "APP" and “Code + ID Card” (incl. 5-keyfobs,card type is 125KHz EM or ID card / tag).

IP68 Waterproof
Zinc alloy wlectroplated case, fully encapsulated in epoxy for superior protection.
Operation temperature: -49?~140?.

Backlit numeric keypad
Backlit keys (non-turn-off) ensures clear visibility of the keys in dark environments or at night.
The Red Yellow Green LED to indicate operation.

Package includes
Dimension: 4.6 x 2.2 inch (118 x 56mm)
- 1 x Metal Access Control;
- 5 x 125kHz RFID Keyfobs
- 1 x Installation Kit
- 1 x User Manual
| Operating Voltage | DC 12V |
|---|---|
| Operation Temperature | -49?~140? |
| Electric lock output | =1A |
| User Capacity | 2000 |
| Read Card Frequency | 125KHz EM-ID card |
| Card Reading Distance | 2 ~ 5 cm |
| Waterproof rate | IP68 |
| Keypad | Digital backlit |
| Unlck Access | Card; code; card+code |
| Unlock Door Relay Time | 0 to 99 seconds adjustable |
| Static electricity | =30mA |
| Humidity | 10% to 90% RH |
Is the garage sliding gate compatible with keypad?

It is compatible with the keypad
If your Garage/Gate Opener works with a wired Universal Wall Button, it is compatible with the keypad. The keypad works with the third-party gate opener or garage door opener whose control board accepts “Normally Open Dry Contact” signal for push button.

It is compatible with the keypad
If your Garage/Gate Opener control board would run by using a pliers or a jumper wire to short the terminals for push button momentary, it is compatible with the keypad. The keypad can be powered by 12V DC from the control board or external power source.
How does this keypad work?
The keypad uses contactless RFID and PIN code technology. It can be used as an multifunction standalone access controller, control an electronic door lock or garage, gate opener, or as a card reader to work with an access control system.
How is the keypad installed?
The keypad is made of metal casing with potting process and can be installed indoors and outdoors. Just screw it to the inside of the door or the same side of the control panel, wired to the electric lock or controller.
Does it still work without WiFi signal?
This is a wired keypad and will work without WIFI. All programming can be done from the keypad, no wifi or computer required. The keypad can be powered by 12VDC from the control board or external power source.
Can the keypad be connected to an Electric lock or exit button?
YES, Keypad be connected to Electric Lock, Exit Button, External Alarm(Not Incl.).
How many users and what cards does the keypad support?
Supports up to 2000 users with a choice of card, 4-digit code or card + code. Card reader supports 125KHZ EM-ID cards (some encrypted cards such as HID, Cobra, APCiK, etc. are not supported).
Security Access Control Keypad
![]() Wired with Tuya Keypad | ![]() Wired with Tuya Keypad | ![]() Wired with Tuya Keypad | ![]() Wired with Tuya Keypad | ![]() Wired with Tuya Keypad | ![]() Wired with Tuya Keypad | ![]() Wired with ID Keypad |
|---|---|---|---|---|---|---|
| Customer Reviews | ||||||
| — | — | — | — | — | — | — |
| Price | ||||||
| — | — | — | — | — | — | — |
| Connection method | ||||||
| Wired | Wired | Wired | Wired | Wired | Wired | Wired |
| Support WiFi Tuya APP | ||||||
| ? | ? | ? | ? | ? | ? | ? |
| Power | ||||||
| DC 12V | DC 12V | DC 12V | DC 12V | DC 12V | DC 12V | DC 12V/24V |
| Keypad Button | ||||||
| Push | Push | Touch | Touch | Push | Touch | Push |
| Temporary PIN Code | ||||||
| ? | ? | ? | ? | ? | ? | ? |
| Open Mode | ||||||
| Code, Card, APP | Code, Card, APP | Code, Card, APP, Fingerprint | Code, Card, APP, Fingerprint | Code, Card, APP | Code, Card, APP, Fingerprint | Code, Card |
| Waterproof | ||||||
| ? | ? | ? | ? | ? | ? | ? |
| Material | ||||||
| Metal | Metal | Metal | Metal | Metal | Metal | Metal |










































