SIEMENS 3RT20161AK61 IEC Magnetic Contactor, 1NO, 110V-120V AC, 3 P,

The SIEMENS - IEC Magnetic Contactor is a non-reversing, three-phase tool designed for industrial and commercial use. It operates on a coil voltage of 110V-120V AC with a frequency of 50/60 Hz. The contactor has an auxiliary contact configuration of 1NO (Normally Open) and uses screws for its electrical connection. With no enclosure, it carries an IP rating of IP20 and can be mounted vertically either on DIN Rail or surface. Its frame size is S00 from the SIRIUS 3RT20 series.

Key features include:

- Full load amps are rated at 9A for inductive loads and 22A for resistive loads.

- Horsepower ratings are dependent on phase and voltage: Single Phase - tested for operation at 1/3 hp at 120V AC, and 1 hp at 240V AC; Three Phase - tested for operation up to a maximum of 7½ hp under varying voltages.

- Operating temperatures have been rated between a maximum of140 Degrees F and a minimum of -13 Degrees F.

- Mechanical Operating Durability has been tested up to approximately thirty million operations.

- Tested response times range from10 to18 msec (AC Operation Closing Delay Operation Opening Delay) under specified conditions.

- Has been manufactured in compliance with REACH Art33, WEEE (2012/19/EU) standards as per available regulatory guidelines.

Please note that this product does not have reversing capability nor does it include an embedded surge suppressor or NEMA enclosure.

. This item has been restricted from sale in the following state(s): []