Epoxy Putty for Metal Pipe Pool Tank, Underwater Repair, 120g Hand-knead 2-part putty cut, mix by hand, apply; works underwater and under pressure

WORKS UNDERWATER & UNDER PRESSUREUnlike liquid epoxy that needs a dry surface, this hand-kneadable putty can be applied directly underwater and on wet surfaces even on pipes and tanks under active water pressure. No need to drain, shut off, or dry before repair. 2 × 60g tubes included. 5-MINUTE WORKING TIMECut the amount you need, knead by hand until uniform gray (35 minutes), and apply. The putty begins to harden within 5 minutes, giving you just enough working time for emergency fixes. Full cure in 24 hours delivers steel-like hardness that can be drilled, sanded, and painted.

BONDS TO MULTIPLE MATERIALSAdheres to metal, PVC, wood, glass, ceramic, fiberglass, stone, and many hard plastics. Especially effective on plumbing fittings, pool surfaces, tank seams, and marine hardware where water presence makes ordinary adhesives fail. NO MEASURING TOOLS NEEDEDA-component is wrapped inside B-component in each putty stick simply cut across the stick to get the correct 1:1 ratio automatically. Knead by hand until the color is uniform. No syringes, no mixers, no dispensers. Just cut, knead, and apply. Wear gloves for skin protection.

POOL, PIPE, BOAT & TANK REPAIRIdeal for pool leaks, water tank cracks, boat hull patching, plumbing joints, heater seals, fence posts, and outdoor metal fixtures. Withstands heat and continuous water exposure after full cure. Must knead until fully mixed (uniform gray) incomplete mixing weakens the bond. Not for PE, PP, PTFE, or silicone