3D Printer Filament Dryer Box, 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA ABS Material, Filament Dehydrator, Spool Holder

Large Storage Volume -
Filament Dry Box Inner Size: 9.29 * 6.49 * 9.13 inch. Dryer box can hold 2 rolls of 1kg spools, suitable for PLA ABS SILK filament. Functions well with all standard filament diameters 1.75 mm/ 2.85 mm. Setting Notes - Adjust the temperature and duration after powering on the filament dehydrator. The unit operates only when the work state is shown on the screen. If the work mode is not displayed, the motherboard will automatically power off after 3 minutes. Filament Dryer and Moisture Removal - 3D printer filament dryer box is built to keep filament dry and extract moisture from various filaments. Internal heating during printing offers a dry storage environment for 3D printer filaments and maintains the filament in a dry state. Prevents tangling, clogging, weak adhesion, and layer shifting caused by damp printing wire.
(Note: Intended solely for drying 3D printer filament) Real-time Temperature and Humidity Monitoring - Adjustable temperature range 40°~ 50 °C, with a maximum temperature of only 50°C, and a settable duration from 6 hours to 12 hours. A 2-inch LCD screen and touch buttons allow for easy operation, providing a more complete and clear information display. Press the power button to start, and hold the function button (M) to adjust the drying time and temperature setting. Well-Sealed Filament Dry Box - The outlet structure uses a silicone cable sheath and Teflon tube, ensuring a smooth outlet that can be closed with a plug when not in use. The upper cover features a snap button design, offering good sealing performance. While the drying box is operating, the sealing hole must be opened to allow moisture to escape. When not in use, close the sealing hole to keep the consumables dry. How to Load the Filament - Place the filament into the filament outlet. Please note that the direction should be counterclockwise so the bottom pulley can feed more effectively. If the screen shows two errors, E0 and E1, open the drying box and inspect all cable sockets on the motherboard for any damage or looseness