PEI Build Plate for Bambu Lab X2D/P2S/P1S/A1/P1P/X1C/X1/X1E 3D Printers 257x257mm Double Sided Smooth&Textured Heated Bed,Spring Steel Sheet,High-Adhesion Removable Flexible Printing Surface-1PCS

Superior AdhesionThis PEI plate is coated with black textured PEI. Its adhesion is stronger than that of the gold PEI coating, allowing the model to be firmly attached to the surface of the printing plate without the need for glue. Easy to RemoveThe smooth PEI makes the bottom of the printed model very smooth, and the model can be removed easily without bending the spring steel sheet. High Temperature ResistanceGenuine PEI powder coating is heat resistant. The PEI textured side is resistant to 300°C and the PEI smooth side is resistant to 200°C.

It can print with most filaments, such as PLA/ABS/ASA/PETG/TPU/Nylon/PA/PC. ApplicationThis double-sided smooth+textured PEI plate fits 3D printers with a platform size of 257*257mm, compatible with Bambu Lab X2D/A1/P2S/P1P/P1S/X1/X1C/X1E. Warm ReminderThe PEI smooth side requires 3D printing glue sticks to prevent the model from falling off, except for PLA filaments. Please peel off the protective film on the smooth PEI side before use. Kind ReminderPlease level the plate again before you change to another side to print. Please wait until the platform has cooled down before removing the model to avoid damage to the surface of the platform.

Please clean the surface regularly with a soft cloth. Do NOT wash or clean the PEI with any strong chemical reagents or strong detergents