Your Browsing History
Meet Your Seller
PolyDissolve S1 PVA Filament, 1.75mm, 750g, Water Soluble Support for PLA/TPU/PVB/Nylon 3D Printer Filament
- WATER-SOLUBLE SUPPORT: PVA-based support filament that dissolves in water after printing, minimizing the need for manual support removal from hard-to-reach areas. FOR COMPLEX GEOMETRY: Supports enclosed cavities, internal channels, detailed overhangs, and other structures where breakaway support may be difficult to reach by hand. MATERIAL COMPATIBILITY: Engineered for compatible PLA, TPU, PVB, and nylon filaments from the portfolio. Run a test print when using a new material or interface profile. KEEP DRY WHILE PRINTING: PolyDissolve S1 absorbs moisture rapidly. Dry at 80°C for 12 hours when needed, store it sealed, and print directly from a dry box for consistent extrusion. DUAL-MATERIAL PRINT SETTINGS: Recommended for dual-nozzle, IDEX, or tool-changing printers. Use 215225°C nozzle temperature, 2560°C bed temperature, cooling fan on, and 50150 mm/s printing speed
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
WATER-SOLUBLE SUPPORT: PVA-based support filament that dissolves in water after printing, minimizing the need for manual support removal from hard-to-reach areas.
FOR COMPLEX GEOMETRY: Supports enclosed cavities, internal channels, detailed overhangs, and other structures where breakaway support may be difficult to reach by hand.
MATERIAL COMPATIBILITY: Engineered for compatible PLA, TPU, PVB, and nylon filaments from the portfolio. Run a test print when using a new material or interface profile.
KEEP DRY WHILE PRINTING: PolyDissolve S1 absorbs moisture rapidly. Dry at 80°C for 12 hours when needed, store it sealed, and print directly from a dry box for consistent extrusion.
DUAL-MATERIAL PRINT SETTINGS: Recommended for dual-nozzle, IDEX, or tool-changing printers. Use 215225°C nozzle temperature, 2560°C bed temperature, cooling fan on, and 50150 mm/s printing speed
FOR COMPLEX GEOMETRY: Supports enclosed cavities, internal channels, detailed overhangs, and other structures where breakaway support may be difficult to reach by hand.
MATERIAL COMPATIBILITY: Engineered for compatible PLA, TPU, PVB, and nylon filaments from the portfolio. Run a test print when using a new material or interface profile.
KEEP DRY WHILE PRINTING: PolyDissolve S1 absorbs moisture rapidly. Dry at 80°C for 12 hours when needed, store it sealed, and print directly from a dry box for consistent extrusion.
DUAL-MATERIAL PRINT SETTINGS: Recommended for dual-nozzle, IDEX, or tool-changing printers. Use 215225°C nozzle temperature, 2560°C bed temperature, cooling fan on, and 50150 mm/s printing speed
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Lu Sincere Store Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...