3in1 NGFF mSATA SSD Adapter Card, M.2 NVMe to PCIE X16, M.2 SATA to SATA III, mSATA to SATA Converter for Reusing M.2 NVMe, M.2SATA & mSATA SSD on Desktop PC

This allinone multifunction adapter card offers three conversion modes to repurpose your idle solidstate drives on desktop motherboards. It handles M.2 NVMe MKey, M.2 SATA BKey and standard mSATA SSDs within one circuit board, saving your budget for storage upgrades.

When fitted with an M.2 NVMe SSD, the adapter routes the NVMe signal through the PCIE X16 slot of your motherboard to deliver full NVMe readwrite speed. For M.2 SATA or mSATA SSDs, it outputs standard SATA III signal. You just connect SATA data cable and SATA power from PC power supply, treating these SSDs the same as regular 2.5inch SATA storage drives.

This is a hardwareonly adapter, no special driver required under Windows and Linux systems. It is ideal for DIY builders, datarecovery work and building lowcost local storage pools.

Important compatibility notes: Only one SSD can be installed and used at one time; simultaneous multiSSD operation is not supported. M.2 NVMe requires motherboard PCIE slot with NVMe protocol support. M.2 SATA and mSATA rely on mainboard SATA III channels. Doublecheck your SSD key specification before ordering.