[New Upgraded] 2 Bay m.2 SATA Docking Station, Tool-Free Type C to SATA SSD External Hard Drive Enclosure for B + M Key,Support Offline Clone duplicator and one- Key System Disk Copy Function. (5Gbps)

Easy to use:

Easy installation & no driver required.

Wide Compatibility:

* Operating system compatibility: Windows, macOS, and Linux.

* Suitable for 2242/ 2260/ 2280/22110 M.2 SATA hard drives

* Can connect to PC, laptop, smart TV, PS4 and other devices.

LED Indicator:

LED indicator lets you know the working status easily.

Energy supply:

The 5V-3A power adapter , Guaranteed with a stable and reliable energy supply for massive data transfer.

better dissipation performance, effectively extend the lifetime of SSD.

Warm tips

1. This external drive docking station support all SATA M.2 SSD.
2. When using the Offline Clone Duplicator, the capacity of 2 SSD must be bigger than the capacity of 1 SSD, otherwise the clone cannot be completed.
3. Offline Clone Function cannot be connected to the computer.Only supports offline clone.
4. SSD condition: If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors.
5. Make sure that the two SSD disks can be recognized on the computer when plug in our SATA M.2 Duplicator.If not, it could not clone.
6. It's normal that the Device heats up, for the high-speed SATA M.2 drives generate much heat while working. Do not touch the SSD during operation.
7. For the brand new SSD drive, it may not find the drive, because the brand new SSD drive should be formatted before first time using. And also need to make the SSD drive partition.
8. If you need to take out the SSD, please pull out the power first, and then take out the SSD.

PORTABLE SSD ENCLOSURE: This external hard drive enclosure for B + M Key SATA 2242 2260 2280 22110 M. 2 SSDs, Supports dual bay M. 2 hard disk reads and writes clone at the same time. (Not support mSATA and NVME)

ONE-KEY OFFLINE CLONE: No need to connect to a PC, Just connect in the power and long press the bottom right button then you can back up your important data. Support one- key system disk copy.

HIGH-SPEED: USB 3.0 Gen1 supports up to 5Gbps. Hard drive disk external docking station is equipped with USB C to C cable, A to C cable and a 5V-3A power adapter.

EASY TO USE: No need any tools. support plug & play and hot swap, no drivers required. LED indicator lets you know the working status easily.

WIDE COMPATIBILITY: Compatible with Windows/Mac/Linux, can be used to offline clone or to expand storage capacity by connecting PC, Laptop computers, smart TVs, PS4 and other devices.