Hard Drive Reader IDE SATA to USB 3.0 + USB C Adapter, 3in1 Ultra Data Retrieval Converter Kit with 12V/2A Power Supply for Internal 2.5'' SSD 3.5'' HDD IDE SATA Blu-ray Drive

2025 Updated Version: FEMORO team updated three parts of the hard drive reader1. Extend the reader body to conveniently use 3.5 ide port; 2. Apply softer 4-pin cable; 3. Use Softer usb 3.0 cable
FEMORO Hard Drive Kit: The sata and ide to usb adapter support 2.5"/3.5" SATA HDD/SSD, 2.5"/3.5" IDE, SATA/IDE Internal Blu-ray Drive. Design to data retrieve and data transfer
Stable & High Speed Data Transfer: This hard drive reader apply USB 3.0 standard, and compatible backup with usb 2.0 standard port. The different hard drive enjoys different data transfer speed, specific speed please on the basis of reality
Considerate Design: The hard drive adapter kit design LED indicator light shows Power and activity status. On/Off power Switch for Hard drives protection. For 3.5" IDE drivers and old SATA HDD, you need to connect 12V/2A power adapter and 4-pin power cable provided
USB+USB C Design: This ide hard drive reader comes with a usb c adapter, the USB-C to USB adapter that plugs into the USB C port to match your laptop and is not limited by the computer model
Professional Technical Team Support: Included usb cable*1, usb c adapter*1, 12V/2A power adapter*1, 4-pin power cable*1, manual*1, 12 months of after-sales. With a professional technical guidance team in place, we are fully prepared to answer any queries you might pose
NOTE1: Please make sure on/off switch is off before connecting to hdd,incorrect connection may cause damage to your hard drive or electrical shock

hard drive reader
Hard Drive Converter
Hard Drive Cable

FEMORO sata and ide to usb/usb c adapter supports 2.5"/3.5" HDD/SSD, 2.5"/3.5" IDE, SATA Internal Blu-ray Drive; Hard drive converter is retrieve old files, backup, cloning and data recovery device tools. This converter allowing connect to three hard disk drives simultaneously.

Notice

1. For 3.5" IDE drivers and old SATA HDD, you need to connect 12V 2A power adapter and 4-pin power cable provided. Attention please turn on the switch on IDE adapter in the last step.

2. Please try to use the 1 meter USB 3.0 data cable provided instead of the other long data cable.

3. If the device cannot be read, try connecting the data cable to your computer's rear USB port.

For 2.5"/3.5" SATA Drive

Please make sure on/off switch is off before connecting to HDD, incorrect connection may cause damage to your hard drive.
External power required for 2.5‘’/3.5" SATA HDD.

For 3.5" PATA (IDE) Drive

Built-in 4-pin power cable, for easy access of 3.5" IDE Driver.
External power adapter required.
Set drive jumper to master single drive mode.
For jumper settings, please refer to your hard drive manufacturer's documentation.

For 2.5" PATA (IDE) Drive

External power adapter is required.

You Will Get

Hard Drive Reader
USB C Adapter*1
12V/2A Power Adapter*1
4-Pin Power Cable*1
USB 3.0 Cable*1
Manual*1

	Hard Drive Reader IDE SATA	Hard Drive Reader	Hard Drive Enclosure	2.5" SSD Enclosure	SATA to USB Adapter with Power Supply and USB C Converter, SATA Hard Drive Re...

Customer Reviews	—	—	—	—	—
Price	—	— no data	—	— no data	—
Compatible Hard Drive Type	2.5"/3.5" SATA, IDE	M.2, SATA, IDE	2.5"/3.5" SATA	2.5'' SATA SSD	3.5‘’ 2.5‘’ HDD/SSD
Connector	USB 3.0 Type A or USB C	USB 3.0 Type A	USB 3.0 Type A	USB 3.0 Type A	USB + USB C
Overall Transmission Rates	5Gbps	10Gbps	5Gbps	5Gbps	5Gbps
Capacity Supported	20TB	20TB	20TB	6TB	20TB