USB3.0 Motherboard Header Adapter 19/20Pin Right Angle Type B Notch Outward, USB 3.0 19/20-Pin 90° Type B adapter. Notch faces outward. L-shape for tight CPU cooler clearance. Gold-plated pins, 5Gbps

1. TYPE B NOTCH FACES OUTWARD | VERIFY BEFORE ORDERING This adapter is Type B: the notch on the motherboard's 19-pin header faces outward (away from the board center). Please check your motherboard header orientation before ordering. If your notch faces inward, choose Type A instead. Using the wrong type may damage pins.
2. 90° RIGHT ANGLE SOLVES CPU COOLER & CASE CLEARANCE ISSUES L-shaped design redirects your front panel USB 3.0 cable 90° sideways, eliminating interference with large CPU air coolers, AIO pump blocks, or tight Mini-ITX layouts. No more bending or forcing stiff 19-pin cables behind the motherboard.
3. 19/20-PIN STANDARD CONNECTOR 5Gbps USB 3.0 SPEED Standard USB 3.0 19-pin/20-pin internal header, male to female extension. Supports SuperSpeed USB 3.0 up to 5Gbps and is backward compatible with USB 2.0/1.1. Plug and play no drivers needed.
4. GOLD-PLATED PINS & SOLID CONNECTION ADDRESSES LOOSE FIT COMPLAINTS Gold-plated contacts ensure stable signal transmission and reliable connectivity. Reinforced housing with precise notch retention prevents pin misalignment. Unlike some adapters that cover the alignment notch, our design preserves the keying notch for correct insertion. Notch is fully accessible no cutting required.
5. WIDE MOTHERBOARD COMPATIBILITY FOR DESKTOP PC, MINI-ITX & ATX Compatible with most desktop motherboards that have a standard USB 3.0 19-pin internal header, including ASUS, MSI, Gigabyte, ASRock, and more. Ideal for Mini-ITX, Micro-ATX, and ATX builds where the USB 3.0 header is blocked or hard to reach.

Is your USB 3.0 front panel cable fighting for space inside your PC case? Is the stiff 19-pin cable being bent at an unnatural angle, putting stress on your motherboard header and risking permanent damage?

The USB 3.0 19/20-Pin 90° Right Angle Adapter is the simple, elegant solution to your cable management woes. This L-shaped adapter changes the installation direction of your USB 3.0 front panel cable by a full 90 degrees, allowing you to route cables cleanly and efficiently even in the tightest spaces.

The Problem: Modern PC cases often position the motherboard USB 3.0 header in awkward locations right next to the GPU, blocked by drive cages, or too close to the case wall. The standard 19-pin USB 3.0 cable is thick and stiff, making it nearly impossible to connect without excessive bending-.

The Solution: This 90° right angle adapter lets you connect your USB 3.0 cable at a comfortable angle, eliminating cable strain and protecting your motherboard header from damage.

Feature Type A Type B (This Product)

Notch Orientation Notch faces inward (toward motherboard center) Notch faces outward (away from motherboard center)

When to Use Motherboard header notch is on the inside- Motherboard header notch is on the outside

Installation Cable routes toward the inside of the board Cable routes toward the outside of the board

Please verify your motherboards USB 3.0 header notch orientation before ordering. This listing is for Type B notch facing outward-28. If your notch faces inward, please purchase Type A-