Your Browsing History
- Free 30-day Returns
$8.99
Meet Your Seller
Visit Thermaltake Store
FOLLOW
Thermaltake Pacific F-Pro Female to Male 20mm Extender Chrome G 1/4 Thread DIY LCS Fitting CL-W440-CU00SL-A
- Extend your Build Utilize your space with a 20mm extension to cover the gap from components to assist with tube runs or combining with fittings for the right fit.
- Chrome Plated Mirror Finish Dipped in Chrome inside and out to prevent corrosion internally when in contact with the coolant offering a mirror like finish.
- Industry Standard Compatibility Offering industry standard G 1/4 threading for mounting to all compatible components with O-ring for a proper seal.
- Simplify Your Build Ideal for extending off radiators for fan clearance or water blocks to add space for the perfect lineup.
- Male to Female G 1/4 Design Provides a continuous Male to female design when used in combination with other fittings or components with rotation.
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Thermaltake F-Pro Female to Male 20mm Extender with G 1/4 thread compatibility in a chrome finish.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- Read full details
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by Thermaltake Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...
The Thermaltake Pacific F-Pro is a 20mm chrome-plated G 1/4 male-to-female extender for custom liquid-cooling loops, suited to PC builders who need extra clearance or a better-aligned fitting between compatible components.
Recommended For
- Custom-loop builders who need to move a G1/4 port connection outward by about 20 mm—for example, to help a tube or attached fitting clear a nearby radiator fan. Check the actual fitting and fan dimensions before choosing this length.
- Builders fitting a custom loop in a tight spot who need extra reach between a component port and another fitting; Thermaltake describes the extender as useful when extending a connection or pairing fittings to make a turn in limited space.
- Custom-loop builders matching G1/4 fittings and components who need a female-to-male connection and want a chrome finish to coordinate with visible loop hardware.
Real-World Use Scenarios
- When a radiator port sits close to a fan or case panel, add the extender before attaching the next fitting; the extra stand-off can help create room for the connection, provided the case has enough clearance.
- When a hard tube would otherwise need a tight bend near a radiator or graphics card, use the extender to move the connection point outward, then route the tube from the new position; this may make the run easier to plan.
- When two loop components are close together or their ports do not line up neatly, add the extender to shift one connection outward; it can make the tube route less cramped without changing the components’ positions.
- When a fitting or tube needs more room to turn near a radiator, use the extender as a short spacer and pair it with a suitable angled fitting; this can help route the connection through a tight area, but the parts still need to fit the available space.
- During a custom-loop rebuild, use the extender to fine-tune the distance between a component port and the next fitting; it can help correct a small spacing mismatch without replacing the radiator, block, or other component.














