Your Browsing History
- $258.74
- Free 30-day Returns
$245.99
Meet Your Seller
Bykski Full Coverage GPU Water Block and Backplate For AMD Radeon RX 7900 XTX (A-RX7900XTX-X)
- ENGINEERED FOR PERFORMANCE: We all know that the GPU is the hottest running component in any personal computer, and properly cooling it is Bykski's #1 priority. The water-cooling block absorbs and exchanges heat quickly, enabling the coolest temps and highest performance vs. any air-cooled graphic card PERIOD.
- SIMPLE INSTALL: Full coverage GPU block with straightforward installation allowing you to get up and running quickly. The block is designed to be compatible with AMD Radeon RX 7900 XTX and use with other video cards is not recommended.
- HIGH-QUALITY DESIGN: Full acrylic (PMMA) and Ultra-high purity purple copper plate, which is the highest quality in these characteristics next to silver. Includes GPU block with backplate and all the mounting hardware, thermal paste/pads, and installed A-RGB (RBW) 5v LED Strip. Everything needed for installation is included with your block no need to pick up extra parts to get cooling your GPU.
- INDUSTRY STANDARD MATERIALS: Knowing that your bloc
+
+
Overview
Specs
Reviews
This full coverage block directly cools the video card core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.
The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.
Compatibility- Compatible with AMD Radeon RX 7900 XTX
- After narrowing your selection, Please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.
- Compatibility based on these circuit board designs only
- Fittings: G 1/4in. Thread
- 1x Full Coverage GPU Water Block
- 1x Backplate
- 2x Stop Fitting
- 1x Mounting Hardware
- Thermal grease
- 1x 5v A-RGB (RBW) Light
- (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.
This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.
Not responsible for any damage caused by or when using this product. Please use it at your own risk.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Tyler Direct Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...