Bykski Durable Metal GPU Water Block and Backplate For NVIDIA RTX PRO 6000 Blackwell Workstation Edition (N-RTXPRO6000-WS-SR) - Continuous Usage

Built for the NVIDIA RTX PRO 6000 Blackwell Workstation Edition, this full-cover block cools the GPU chip, memory and power stages in one pass. Workstation cards run at board power for hours on end, and once the stock heatsink is removed the loop is the card's only cooling path.

Chassis airflow has to cover everything else in the case, so this block moves the card's heat into the loop instead. The nickel-plated copper base is 0.35 mm thick with fine micro-channels under its fins, so the coolant has plenty of copper to pull heat from.

Specifications

• Block Material: Nickel-plated T2 copper, nickel-plated copper top


• Backplate Material: Anodized aluminum (not in contact with coolant)


• Dimensions: 233.85 x 121.82 x 20.70 mm (width includes ports)


• Port Thread: G1/4

Compatibility

ONLY Compatible with:

• NVIDIA NVIDIA 6000 - RTX PRO 6000 BLACKWELL WORKSTATION EDITION

Parts Included

• GPU water block with backplate: 1


• Thermal pads: 1.5 mm, cut to size


• Thermal paste: 1


• Spring screws


• Washers: 0.5 mm


• Original GPU bracket: 1


• PCI-E baffle: 1


• M2x5 mm cross flat screw: 8


• M1x5x4 mm cross flat screw: 2


• M2x3 mm flat head screw: 8


• M3x5 mm flat head screw: 3

Warnings

Warranty is repair or replacement. Returns are accepted within 30 days, no questions asked. A restocking fee applies to every return, with a higher fee for items that have been installed or used.

Installation removes the card's stock heatsink, after which it can no longer be cooled by chassis air. Never power the card without the loop installed and the pump running. Thermal pads go where the block has corresponding raised contact points; the GPU chip uses thermal paste.

No printed instructions are included; the installation illustration is in the gallery images. The manufacturer may modify the design, so the delivered product may differ from the images. Qualified users must install it themselves. The manufacturer isn't liable for damage caused by misuse, improper installation, noncompliant operation, or incompatible hardware or fluids. Use constitutes acceptance of these risks.