Bykski Durable 360mm Server AIO Liquid GPU Cooler For NVIDIA RTX PRO 6000 Blackwell Server Edition (B-FRD-RTXPRO6000-SR-360)

The Bykski Durable 360mm Server AIO Liquid GPU Cooler is a single-card kit: one full-coverage water block on a sealed loop with a 360 mm radiator. It fits four cards on the same Blackwell board layout - RTX PRO 6000 Blackwell Server Edition, RTX PRO 6000 Blackwell Max-Q, RTX 6000D and RTX PRO 5000 Blackwell - and is sized to remove the full 600 W a Server Edition can draw.

The block covers die, memory and VRM in one pass and moves that heat to the chassis wall, so the card stops competing with everything else in the case for front-to-back air. On a passively cooled Server Edition that is the whole point: the stock card has no fans and lives or dies on chassis airflow. The pump sits off the block on its own mount rather than on top of the die, so nothing vibrates against the card and the pump can be reached without disturbing the block. The loop ships pre-filled and pre-bled - no filling, no bleeding, nothing to top up.

Specifications

• Water block: 1 x full-coverage - T2 copper, electroless nickel plating, 0.35 mm base


• Radiator: 360 x 40 mm, 11 water channels, aluminium fin - requires a 4U or larger chassis


• Fans: 3 x 120 mm PWM - 3000 RPM +/-10%, 105.5 CFM, 5.27 mmH₂O, 45.6 dBA


• Pump: split design, mounted off the block - 7000 RPM, 450 L/H, 7 m head


• Tubing: sealed, low-permeation EPDM - 360.93 mm


• Assembled height: 480 mm


• Coolant: pre-filled non-conductive anti-corrosion blend; the loop is sealed and must not be opened or topped up


• Chassis: 4U or larger with a 360 mm radiator mount, plus clearance above the card for the power connector. Assembled height 480 mm; 360.93 mm of tubing between radiator and block

Compatibility

ONLY Compatible with:

• NVIDIA RTX PRO 6000 Blackwell Server Edition


• NVIDIA RTX PRO 6000 Blackwell Max-Q


• NVIDIA RTX 6000D 84G


• NVIDIA RTX PRO 5000 Blackwell

Parts Included

• Bykski 360 mm Server AIO Liquid GPU Cooler - radiator, pump, tubing and water block, pre-assembled and pre-filled


• 3 x 120 mm PWM fans


• Thermal pads for memory and VRM, thermal compound for the die, and mounting hardware

Warnings

This is a repair or replacement-only item. Returns are not accepted on compatibility issues - confirm fitment before ordering.

Block installation is covered by the install guide included with the kit. The manufacturer may alter the design to improve compatibility or performance, so the delivered item may not match the pictured item exactly.

Do not modify the tubing or open the sealed loop; doing so voids the warranty and can cause leaks or failure.

Removing the stock cooler from a passively cooled Server Edition card means it can no longer run on chassis air. Do not power the card without the loop installed and the pump running.

This product is for self-installation by qualified users. The manufacturer is not liable for damage resulting from misuse, including improper installation, operation outside specification, or use with incompatible hardware or environments. By using this product you accept those risks.