Your Browsing History
- Free 30-day Returns
$559.99
Meet Your Seller
Bykski Durable 360mm Server AIO Liquid GPU Cooler For NVIDIA RTX PRO 6000 Blackwell Workstation Edition (B-FRD-RTXPRO6000-WS-360)
- FITS NVIDIA RTX PRO 6000 BLACKWELL: Machined specifically for the RTX PRO 6000 Blackwell Workstation Edition circuit board. Verify your card matches the reference layout before purchase.
- FACTORY SEALED AND PRE-FILLED: The loop arrives fully assembled and pre-bled with non-conductive coolant. You avoid custom loop maintenance with nothing to fill, bleed, or top up.
- INLINE PUMP DESIGN: The 7000 RPM pump sits inline in the tubing rather than on the card. This eliminates vibration against the circuit board and runs quieter than pumps built into the block.
- CLEARANCE REQUIREMENTS: Requires a 360 mm radiator mount with 63 mm of depth for radiator and fans, plus the card with block attached. Flexible braided EPDM tubing bends smoothly to fit your case.
- USA SUPPORT, FRIENDLY AND EXPERIENCED: Tyler Direct provides knowledgeable US-based support for troubleshooting and compatibility questions. Every purchase carries a 1-year warranty covering defects.
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
The Bykski Durable 360mm Server AIO Liquid GPU Cooler is a closed-loop kit for the NVIDIA RTX PRO 6000 Blackwell Workstation Edition. Radiator, inline pump, tubing, fans, and block arrive pre-assembled, pre-filled, and pre-bled, removing custom loop assembly.
The T2 copper block cools the GPU chip, memory, and power stages in one pass, directing heat to the 360 mm radiator. Placing the pump inline within the tubing eliminates vibration against the card and sustains 450 L/h flow under continuous load.
Specifications
- Water Block: T2 copper, electroless nickel, 233.85 x 121.82 x 20.70 mm
- Radiator: 396 x 120 x 38 mm, 63 mm with fans
- Fans: 3 x 120 mm PWM
- Pump: Inline, 7000 RPM
- Fits: a 360 mm radiator position with 63 mm of depth, plus the card with the block on it
Compatibility
ONLY Compatible with:
- NVIDIA RTX PRO 6000 Blackwell Workstation Edition
Parts Included
- GPU water block with backplate: pre-assembled with radiator, pump, and tubing (pre-filled)
- Fans: 3 x 120 mm PWM
- Thermal pads: for memory and power stages
- Thermal paste: for the GPU chip
- Mounting hardware
Warnings
Warranty is repair or replacement. All returns are accepted within 30 days, no questions asked. An installed or used item comes back at a higher restocking fee.
The loop is sealed, pre-filled and pre-bled. Do not open it, do not modify the tubing and do not attempt to top it up. Doing so can cause a leak or a pump failure.
Removing the stock cooler from a passively cooled card means it can no longer run on chassis air. Do not power the card without the kit installed and the pump running.
Fitting the kit means removing the stock cooler and exposing the GPU chip. Thermal pads go on the memory and the power stages; thermal paste goes on the GPU chip.
The manufacturer reserves the right to alter the design to expand compatibility, so the delivered item may not match the pictured item exactly.
This product is for self-installation by qualified users. Not responsible for any damage caused by or when using this product. Please use at your own risk.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Tyler Direct Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...