Your Browsing History
Meet Your Seller
Bykski 360mm AIO Liquid GPU Cooler For Sapphire RX 7900 XTX (B-FRD-SP7900XTX-360)
- FITS SAPPHIRE RX 7900 XTX: Machined specifically for the Sapphire RX 7900 XTX NITRO+ 24GB OC, PULSE 24GB, PULSE 20GB OC, PLATINUM 20GB OC circuit board layout. Check your card PCB before ordering.
- FACTORY SEALED AND PRE-FILLED: The loop arrives fully assembled, filled, and bled from the factory. You get liquid cooling performance without the complexity of building a custom loop.
- QUIET INLINE PUMP: Positioned in the tubing rather than on the water block to isolate vibration. This design runs quieter than on-block pumps and keeps mounting pressure flat across the GPU.
- CHASSIS CLEARANCE REQUIREMENTS: Requires a 360 mm radiator mount with 63 mm of depth for the core and fans. Flexible EPDM braided tubing routes cleanly to the installed water block.
- USA SUPPORT, FRIENDLY AND EXPERIENCED: Tyler Direct provides knowledgeable US-based support for troubleshooting and compatibility questions. Every purchase carries a 1-year warranty covering defects.
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
The Bykski 360mm AIO Liquid GPU Cooler provides complete liquid cooling for the Sapphire RX 7900 XTX without the work of building a custom loop. The sealed unit arrives factory-assembled, pre-filled, and pre-bled, ready to mount directly to your graphics card.
Cooling the GPU chip, memory, and power stages through a T2 copper cold plate moves heat directly to the 360 mm aluminum radiator. An inline pump isolates mechanical vibration from the circuit board, maintaining quiet operation and balanced mounting pressure across the card.
Specifications
- Water Block: T2 copper, electroless nickel, (with ports)
- Radiator: 396 x 120 x 38 mm, 63 mm with fans
- Fans: 3 x 120 mm PWM
- Pump: Inline, 7000 RPM
- Fits: a 360 mm radiator position with 63 mm of depth, plus the card with the block on it
Compatibility
ONLY Compatible with:
- SAPPHIRE AMD RADEON RX 7900 XTX NITRO+ 24GB OC
- SAPPHIRE AMD RADEON RX 7900 XTX PULSE 24GB
- SAPPHIRE AMD RADEON RX 7900 XT PULSE 20GB OC
- SAPPHIRE AMD RADEON RX 7900 XT PLATINUM 20GB OC
Parts Included
- GPU water block with backplate, 360 mm radiator, inline pump, and tubing (pre-assembled, pre-filled)
- 120 mm PWM fans: 3
- Thermal pads for memory and power stages
- Thermal paste for the GPU chip
- Mounting hardware
Warnings
Warranty is repair or replacement. All returns are accepted within 30 days, no questions asked. An installed or used item comes back at a higher restocking fee.
The loop is sealed, pre-filled and pre-bled. Do not open it, do not modify the tubing and do not attempt to top it up. Doing so can cause a leak or a pump failure.
Removing the stock cooler from a passively cooled card means it can no longer run on chassis air. Do not power the card without the kit installed and the pump running. The top is acrylic. Tighten mounting screws evenly and finger tight - over-tightening cracks acrylic, and a cracked top is not covered in warranty.
Fitting the kit means removing the stock cooler and exposing the GPU chip. Thermal pads go on the memory and the power stages; thermal paste goes on the GPU chip.
The manufacturer reserves the right to alter the design to expand compatibility, so the delivered item may not match the pictured item exactly.
This product is for self-installation by qualified users. Not responsible for any damage caused by or when using this product. Please use at your own risk.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Tyler Direct Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...