Skip to main content
Out of stock
  • $479.99
  • Free 30-day Returns
  • $15.99 Shipping ()
Price alert
Shop it at NeweggBusiness.

Meet Your Seller

Bykski 360mm AIO Liquid GPU Cooler For GIGABYTE RX 9070 XT GAMING OC 16GB

  • FITS THE LISTED CARDS: Made for the GIGABYTE Radeon RX 9070 XT Gaming OC 16GB and Radeon RX 9070 Gaming OC 16GB. The block is machined for their circuit board.
  • SEALED AND PRE-FILLED: The loop arrives pre-assembled, pre-filled and pre-bled. There is nothing to fill, bleed or top up, and no loop to build.
  • INLINE PUMP: The 7000 RPM pump sits in the tubing, with nothing mounted to the card. Nothing vibrates against the card, so it runs quieter than a pump built into a block.
  • WHAT HAS TO FIT: A 360 mm radiator position with 63 mm of depth for radiator and fans, plus the card with the block on it. The braided tubing is flexible.
  • USA SUPPORT, FRIENDLY AND EXPERIENCED: Tyler Direct provides knowledgeable US-based support for troubleshooting and compatibility questions. Every purchase carries a 1-year warranty covering defects.
+
+
Overview
Specs
Reviews

Any questions? Ask CelesteSM will help you find out quickly.

The Bykski 360mm AIO Liquid GPU Cooler is a sealed, pre-filled liquid cooling kit for the GIGABYTE Radeon RX 9070 XT Gaming OC 16GB and the GIGABYTE Radeon RX 9070 Gaming OC 16GB. The block, inline pump, tubing and 360 mm radiator arrive as one loop, pre-assembled and pre-bled. The block is machined for the circuit board of these cards and has a clear acrylic top over a nickel-plated T2 copper cold plate.

Why it works

  • Nothing to fill, bleed or top up: the loop arrives sealed and ready.
  • The pump sits inline in the tubing, so nothing vibrates against the card.
  • A 0.35 mm base and 44 micro-channels at the GPU chip move heat into the coolant quickly.
  • Thermal pads cool the memory and power stages; the block and fans have 5V ARGB lighting.

Compatibility

  • GIGABYTE AMD 9070 - RADEON RX 9070 XT GAMING OC 16GB
  • GIGABYTE AMD 9070 - RADEON RX 9070 GAMING OC 16GB

Specifications

  • Water Block: T2 copper, electroless nickel, acrylic top, 219.95 x 149.47 x 26.25 mm (with ports)
  • Radiator: 396 x 120 x 38 mm, 63 mm with fans
  • Fans: 3 x 120 mm PWM
  • Pump: Inline, 7000 RPM
  • Fits: a 360 mm radiator position with 63 mm of depth, plus the card with the block on it

In the box

  • Kit: radiator, inline pump, tubing and water block with backplate, pre-assembled and pre-filled
  • Fans: 3 x 120 mm PWM, 5V ARGB
  • Thermal pads for the memory and power stages
  • Thermal paste for the GPU chip
  • Mounting hardware

Installation

  • Check that the case has a 360 mm radiator position with 63 mm of depth for radiator and fans, and room for the card with the block on it.
  • Remove the stock cooler from the card and clean the GPU chip.
  • Place the thermal pads on the memory and the power stages, and apply the thermal paste to the GPU chip.
  • Set the block on the card, add the backplate and secure it with the included mounting hardware, tightening the mounting screws evenly and finger tight so the acrylic top does not crack.
  • Mount the fans on the radiator and the radiator in the case, routing the flexible tubing without sharp bends.
  • Install the card, then connect the pump and fans to PWM headers and the lighting.

Warnings

The loop is sealed and pre-filled. Do not open it or refill it.

Never power the card without the cooler installed and the pump running.

The lighting plugs into a 5V 3-pin addressable (ARGB) header or an ARGB controller only. A 12V 4-pin RGB header will damage it.

No printed instructions are included; the installation illustration is in the product images.

Self-installation by users experienced with PC water cooling. The manufacturer may update the design, so the product you receive may differ slightly from the images. The manufacturer is not liable for damage caused by misuse, improper installation, operation outside the stated specifications, or incompatible hardware or fluids. Installing and using this product means you accept these risks.

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

  • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
  • CONTACT

Return Policies

Manufacturer Contact Info

LOADING...