Darkside 27.5" (70cm) Female-Female Pre-Sleeved ATX and PCI-E Wire - Pink (DS-0908)

This DarkSide pre-sleeved wire is a single 18AWG wire, 27.5" (70cm) long, sleeved in pink DarkSide high density sleeving and finished on both ends with a crimped female Molex ATX terminal (Mini-Fit Jr.). Replace the wires of an original power supply cable with pre-sleeved wires of the length you need, or push the pins into empty ATX and PCI-E connector housings, and you build your own custom power supply cables wire by wire, without cutting, sleeving or crimping anything yourself.

Properties

• Type: Pre-sleeved, pre-crimped single wire
• Ends: Female to female
• Pins: Female Molex ATX terminals (Mini-Fit Jr.), crimped
• Sleeving: DarkSide high density, without heat shrink
• Wire: 18AWG
• Length: 27.5" (70cm)
• Sleeve color: Pink
• Pieces in the pack: 1 wire

Custom power cables without the crimping

Sleeving every wire and crimping every pin is the slow part of a custom cable build. With these wires that work is already done: each wire is sleeved in DarkSide high density sleeving and has a Molex ATX terminal (Mini-Fit Jr.) crimped on at each end, ready to be pushed into its connector housing. You only plan the pinout, choose the colors and click the pins into place.

A female pin at both ends

DarkSide sorts the female-female wires under power supply replacement cables. With a female pin on each end, the wire goes into a connector housing at both ends, the way the wires of a modular power supply cable run from the power supply to the graphics card or motherboard. For an extension that plugs onto an existing cable, use the male-female version of the wire.

One wire at a time

Simply replace the wires of the original power supply cable with pre-sleeved DarkSide wires of the length you want. To keep the chance of a mistake low, DarkSide recommends changing one wire at a time: take one original wire out of its housings and put the matching pre-sleeved wire into the same positions before you move on to the next. The wires work with any standard power supply cable.

Lengths and colors

ModMyMods carries the female-female wires in three lengths, 12" (30cm), 17.5" (45cm) and 27.5" (70cm), and DarkSide makes the wires in more than 20 sleeve colors. Mix colors wire by wire to build stripes, color blocks or a single solid color, so the cable pattern is only limited by your ideas.

Technical data

• Brand: DarkSide
• Type: Pre-sleeved ATX and PCI-E wire
• Connector type: Molex ATX terminal (Mini-Fit Jr.)
• End 1: Female ATX terminal, crimped
• End 2: Female ATX terminal, crimped
• Wire gauge: 18AWG
• Length: 27.5" (70cm)
• Sleeving: DarkSide high density sleeving, without heat shrink
• Sleeve color: Pink
• Use: ATX and PCI-E connector housings of standard power supply cables

Notes

• Before you build a cable, check the pinout of your power supply and of the part you connect. Modular power supply pinouts differ between makers and even between models of the same maker, and a wrong pin position can damage hardware.
• Work with the power supply switched off and unplugged.
• This listing is one 27.5" (70cm) wire in pink.

In the box

• 1x 27.5" (70cm) pre-sleeved 18AWG wire with a female Molex ATX terminal (Mini-Fit Jr.) crimped on both ends