- Free 30-day Returns
Meet Your Seller
Darkside 17.5" (45cm) Male-Female Pre-Sleeved ATX and PCI-E Wire - White (DS-0885)
- With Darkside's pre crimped ATX wires, it is easier than ever before to make your own custom ATX power cables. Each wire is sleeved in one of an assortment of different colors and crimped off on both ends with standard ATX pins ready to popped into t
- Still not easy enough for you? No problem, we are here to help. Pick out some colors and let us know what you need made. Send an email to [email protected] for a quote.
Any questions? Ask CelesteSM will help you find out quickly.
This DarkSide pre-sleeved wire is a single 18AWG wire, 17.5" (45cm) long, sleeved in white DarkSide high density sleeving, with a crimped male Molex ATX terminal (Mini-Fit Jr.) on one end and a female terminal on the other. Push the pins into empty ATX and PCI-E connector housings and you build your own custom extension cables for any power supply, wire by wire and without cutting, sleeving or crimping anything yourself.
Properties
- Type: Pre-sleeved, pre-crimped single wire
- Ends: Male to female
- Pins: Molex ATX terminals (Mini-Fit Jr.), 1x male and 1x female, crimped
- Sleeving: DarkSide high density, without heat shrink
- Wire: 18AWG
- Length: 17.5" (45cm)
- Sleeve color: White
- Pieces in the pack: 1 wire
Custom power cables without the crimping
Sleeving every wire and crimping every pin is the slow part of a custom cable build. With these wires that work is already done: each wire is sleeved in DarkSide high density sleeving and has a Molex ATX terminal (Mini-Fit Jr.) crimped on at each end, ready to be pushed into its connector housing. You only plan the pinout, choose the colors and click the pins into place.
A male pin and a female pin
DarkSide sorts the male-female wires under extension cables. The male pin goes into the housing that plugs onto the existing power supply cable, and the female pin goes into the housing that plugs into the graphics card or motherboard, so the finished cable extends the original one. For a cable that replaces a modular power supply cable, use the female-female version of the wire.
One wire at a time
To keep the chance of a mistake low, DarkSide recommends fitting one wire at a time on both connector sides: push the male pin into its position in one housing and the female pin into the matching position in the other housing before you move on to the next wire. The wires work with any standard power supply cable.
Lengths and colors
ModMyMods carries the male-female wires in two lengths, 12" (30cm) and 17.5" (45cm), and DarkSide makes the wires in more than 20 sleeve colors. Mix colors wire by wire to build stripes, color blocks or a single solid color, so the cable pattern is only limited by your ideas.
Keep a pin removal tool at hand
A pin that sits in the wrong position has to come out of the housing again. ModMyMods recommends the Billy Brown Tool for that job, so the wire comes back out of the housing without damage.
Technical data
- Brand: DarkSide
- Type: Pre-sleeved ATX and PCI-E wire
- Connector type: Male-female Molex ATX terminal (Mini-Fit Jr.)
- End 1: Male ATX terminal, crimped
- End 2: Female ATX terminal, crimped
- Wire gauge: 18AWG
- Length: 17.5" (45cm)
- Sleeving: DarkSide high density sleeving, without heat shrink
- Sleeve color: White
- Use: ATX and PCI-E connector housings of standard power supply cables
Notes
- Before you build a cable, check the pinout of your power supply and of the part you connect. Modular power supply pinouts differ between makers and even between models of the same maker, and a wrong pin position can damage hardware.
- Work with the power supply switched off and unplugged.
- This listing is one 17.5" (45cm) wire in white.
In the box
- 1x 17.5" (45cm) pre-sleeved 18AWG wire with a male Molex ATX terminal (Mini-Fit Jr.) crimped on one end and a female terminal on the other
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory



