TheSK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGBis a distro plate, as well as an expansion tank and pump solution in one. Suitable for the front of the Lian Li O11 Dynamic EVO RGB case. High quality materialsOnly branded acrylic glass is used for the production of the distro plates. The material is machined on precision machines in the Stealkey Customs halls. In addition, M3 stainless steel screws are used to assemble the distroplates. Powder-coated sheet steel covers the D-RGB stripes on the side, which are soldered by hand.
Reverse ModeThe Crosscool 3 allows you to invert your configuration. This is because the Lian Li O11 DYNAMIC EVO RGB case can be mirrored if required. The graphics card and mainboard then do not have to be viewed from the left, but can be viewed from the right side panel. Ideal for CPU and GPU waterblocksA total of 9 ports ensure the connection of a vertically and horizontally installed GPU cooler. Of these, 6 ports are available for the input and 3 for the output. Their spacing is selected so that the graphics card cooler can be connected to the connections on the distroplate in a straight line, regardless of the PCI slot in which the graphics card is located.
can be connected in a straight line. Two further ports with a distance of 28 mm enable a CPU cooler to be connected to the distroplate in a straight line. Compatible radiatorsThe Distroplate supports up to 3x 360mm radiators, so that the size advantages of the case can be exploited to get the full potential out of the hardware components. With the Distroplate installed, the maximum radiator thickness is as follows:
Top: 48
mmBottom: Max. 48 mm (Radiator ports on the distro plate side for direct connection, no
tubing over fans)Side: 48 mmStill looking for the right radiator? Get theSC RadPro L360 H30 – Blackfor your setup! Pump holder for D5 and DDC pumpsWe use a proven principle for mounting the Xylem Lowara D5 and DDC pumps. A custo