WY576T PCIe X4 Dual Port Server Adapter Copper RJ45 Gigabit 1000Mbps Ethernet Network Card For 82576 E1G42ET

Features: WY576T is based on intel 82576EB Gigabit Ethernet Controller? Is PCI-Express X4 network interface card that contains. Two Gigabit RJ45 ports on a PCI-Express adapter.
Copper Gigabit Ethernet 1000Base-T: Independently copper Gigabit Ethernet channels support four Gigabit Ethernet (1000Base-T), Fast Ethernet (100Base-Tx) and Ethernet (10Base-T). Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10 Mbps (100Base-T) operation. Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100 / 10 Mbps operations Simplex or Full Duplex.
Common Key features: Support PCI Express Base Specification 2.0 (5 GTs). High performance, reliability, and low power use in Intel 82580 Quad integrated MAC + PHY and SERDES chip Controllers. Ultra deep, packet buffer per channel lowers CPU utilization. Hardware acceleration that can offload tasks from the host processor. The Controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation. Server class reliability, availability
and performance features: Link Aggregation and Load Balancing.
Switch dependent: 802.3 ad (LACP), Generic Trunking ( GEC / FEC). Switch and NIC Independent. Failover Priority queuing 802.1 p layer 2 priority encoding. Virtual LANs 802.1 q VLAN tagging. Jumbo Frame ( 9.5KB ). 802. x flow control. Multicast/ broadcast Packet replication. Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB ( 802.3 z, Clause 30). Supports Vital Product Data (VPD). LEDs indicators for link/Activity status.

Specifications

Model: WY576T
Chipset: intel 82576
Slot Type: PCI-E
X4 Interface: RJ45 * 2
Transmission Rate: 10/100/1000Mbps
Boot Rom: Yes
Management Features: IPMI pass-through via SMBus or NC-SI, WoL, PXE remote boot, ISCSI boot, VLAN filtering
Transmitted Power Supports System: DOS, Windows, Linux, FREEBSD, NWSERVER
Package Included: 1 x Network Card