Your Browsing History
- Free 30-day Returns
$73.99
Meet Your Seller
PrimoChill 10mm ID x 14mm OD Rigid Acrylic/PMMA Tubing - 750mm Length, Made with Premium Materials, Perfect Hardline for PC Watercooling, Proudly Packaged in the USA - 4 Pack - Frosted
- SIMPLIFYING WATERCOOLING: The perfect rigid watercooling tubing for custom PC building. Ideal length to make long runs or cut up to specific lengths with plenty left over. The unique construction offers superior durability allowing users to be confident of its longevity.
- PROVEN LEADER: Dependable and cost-effective solution for custom builds and the go-to product for both beginners and pros.
- DEFUSED SIGHT: Frosted for perfect diffused/opaque viewing of your favorite coolant.
- TRUSTED BRAND: Provides customers with a user-friendly design, allowing customers to easily and quickly install the tube. With its high heat resistance, the material can withstand the demands of modern watercooling requirements without deforming.
- WHAT YOU GET: 4x PrimoChill 750mm Frosted Rigid PMMA/Acrylic Tubes created with virgin materials and designed for custom watercooling, designed and packaged here in the USA.
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Frosted Rigid Acrylic/PMMA Tube from PrimoChill is made from strong, frosted acrylic and is designed to withstand high temperatures and chemical corrosion better than other plastics. Some users prefer Acrylic tubing over PETG for its higher melting point, more stain-resistant properties, superior clarity, and scratch resistance. With PrimoChill tube, you can achieve tight bends without the need for excessive compression fittings or 90-degree angle rotaries. This reduces the time and money you spend searching for a suitable fitting for your build. Measure Cut Bend Install - DONE! FeaturesTrusted/Experienced Brand.
PrimoChillFrosted Perfection for diffused viewingHigh Melting PointThicker Wall for
Safer OperationSpecifications Inner Diameter: 10mm
Outer Diameter: 14mm
Wall Thickness: 2mm
Length: 750mm / 29.5 inches
Pack Size: 4
Compatibility Fittings: 14mm OD Rigid Compression Parts Included 4 Pieces of 750mm Frosted Acrylic/PMMA tube Warnings With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with many cooling components; however, using alcohol, Ethylene Glycol, and other harmful chemicals is strictly prohibited and will void your warranty. Not responsible for any damage caused by or when using this product. Please use at your own risk.
Installation PLEASE NOTE: When using a bending insert with rigid tubing, remember it is meant to have a tight fit. If it is loose, the rigid tube will collapse, kink, and form air pockets and flat spots when heated. The tighter the fit, the better the result. This process requires patience but will become easier the more you practice. The bending insert requires stretching and lubricating in the rigid tube. The steps to success are below:
1. Stretch the bending insert. Remove any excess that isnt stretched.
2. Ream the rigid tube with an RFB for best results (or a hand reamer if that's all you have). This wi
PrimoChillFrosted Perfection for diffused viewingHigh Melting PointThicker Wall for
Safer OperationSpecifications Inner Diameter: 10mm
Outer Diameter: 14mm
Wall Thickness: 2mm
Length: 750mm / 29.5 inches
Pack Size: 4
Compatibility Fittings: 14mm OD Rigid Compression Parts Included 4 Pieces of 750mm Frosted Acrylic/PMMA tube Warnings With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with many cooling components; however, using alcohol, Ethylene Glycol, and other harmful chemicals is strictly prohibited and will void your warranty. Not responsible for any damage caused by or when using this product. Please use at your own risk.
Installation PLEASE NOTE: When using a bending insert with rigid tubing, remember it is meant to have a tight fit. If it is loose, the rigid tube will collapse, kink, and form air pockets and flat spots when heated. The tighter the fit, the better the result. This process requires patience but will become easier the more you practice. The bending insert requires stretching and lubricating in the rigid tube. The steps to success are below:
1. Stretch the bending insert. Remove any excess that isnt stretched.
2. Ream the rigid tube with an RFB for best results (or a hand reamer if that's all you have). This wi
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by To the Internet media Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...