PoE Ethernet/USB HUB HAT Board with ABS Case Box for Raspberry Pi Zero 2W/2WH/Zero, PoE 802.3af-Compliant Ethernet Port and 3X USB 2.0 Ports Compatible with USB 2.0/1.1

OverviewThe PoE-ETH-USB-HUB-BOX is a HUB kit with Waveshare PoE/ETH/USB HUB HAT inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. By using this small HUB BOX and some proper 802.3 af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi Zero in only one Ethernet cable, along with 3x extended USB ports.

FeaturesPoE Ethernet / USB HUB HAT with BOX, Compatible with
Raspberry Pi Zero series: Designed for Raspberry Pi Zero, compatible with Zero series boardsExtended
Ethernet port: USB to Ethernet conversion by the RTL8152B chip, 10M / 100M auto-negotiationPoE (Power over Ethernet) feature, 802.3 af-compliantFully isolated SMPS (Switch Mode Power Supply) 3x extended USB ports, compatible with USB 2.0 / 1.1A ngle rounded design, smooth hand feeling, "simple snap" case lidQuality ABS material, dull polish surface, anti-fingerprintComes with two different lids, changing as you likeSpecificationsPoE power input: 37V ~ 57V
DC inPower output: 5V 2.5A
DC outNetwork standard: IEEE 802.3 af-compliant
PoEUser Manual/How-to-use: //bit. ly/3MpuA36Package ContentPoE/ETH/USB HUB HAT kit x1ABS case x1Rubber feet 4PCS x1Screws pack x1FAQ:
Question: Why doesn't the Raspberry Pi recognize USB devices?
Answer: Please connect the USB HUT interface to the PC by USB cable to check if the HUB can be recognized. If the HUB can be recognized by PC but not the Pi, please check if you have connected the USB connector tightly. And if you have set the USB port of Pi zero for networking, it cannot be used with the USB HUB either.