Left Side Armory Saddle Hip Saver GoPro + MagSafe - Bridge Spreader Grips the Rope Itself and Stops Hip Pinch, Magnetic Dock for MagSafe and Qi2 Phones, 2-Prong Action Camera Mount, Saddle Hunting

The rope-retention ears on this spreader close on your bridge rope and hold it to the rope itself, not just to the carabiner. Set it at the junction between your tether and your bridge rope and it stays there through the sit, including when the bridge goes slack, instead of ending up in your lap. Your bridge converges into a narrow V above you, and that convergence is what squeezes inward on your hips. This sits at the top of that V and holds the two legs 4.53 in. (115 mm) apart, a number we publish so you can check it against your own setup.

The relief is at your hips; the part does its work up at the carabiner and never touches you. A post-process surface finish leaves the rope channel slick, so the legs glide as you shift instead of binding, and the carabiner stays quieter against it. It is also your camera mount, which is the case for buying it: one purchase instead of two, one part on your bridge instead of two, one thing to check at height, one thing to find in the dark. Because it lives at the carabiner, the phone or camera rides above you and looks down and out over your setup, not up from your waist. The magnetic dock takes MagSafe and Qi2 magnetic phones, including Android in a Qi2 magnetic case. A thick case or one with no magnets weakens the hold, so run a magnetic-compatible case or none, and put a leash on your phone. The 2-prong mount takes a GoPro, Insta360, or any action camera on the included screw, which holds mechanically. It carries bridge load in normal use. Your rope stays captured inside your carabiner the whole time, so even if the part failed it cannot drop you. Nylon 12, black, 3.15 oz ( 89.2 g) fully assembled, 5.00 x 2.87 x 0.87 in. (127 x 73 x 22 mm), Limited Lifetime warranty. Made in the USA in Coopersville, West Michigan.