Industrial 4-Port PoE/PoE++ Managed Switch, 360W, 802.3bt, 2X SFP, DIN-Rail

90 W PER PORT ON ALL FOUR PORTS, 360 W TOTAL BUDGET, IEEE 802.3 bt TYPE 4 Full Type 4 on every port at once rather than a budget shared between them. Backward compatible with 802.3 af and 802.3 at devices on the same port. ^^ UAL REDUNDANT 4857 V DC TERMINAL INPUTS Two independent industrial terminal inputs, so a second supply can back up the first and a single PSU failure does not drop four cameras. At a 360 W budget the supply is sized to the installation rather than to the switch, so no PSU is bundled pick it for the load you are actually running.

^^ TWO SFP UPLINKS WITH BOTH A SINGLE-MODE AND A MULTIMODE MODULE IN THE SET 1310 nm single-mode and 850 nm multimode LC modules ship fitted-ready. The uplink can go to either fiber plant without ordering optics separately.
^^ WEB-MANAGED LAYER 2: VLAN, PER-PORT PoE CONTROL, QoS, SNMP, IGMP, DIAGNOSTICS Port-level power cycling and link diagnostics from a browser, so a hung camera at the far end of a run does not need a site visit. ^^ 35 mm DIN RAIL, IP40 METAL HOUSING, TEMPERATURE AND HUMIDITY SENSOR IN THE SET Rail-mounted beside the supply in the same cabinet. The bundled sensor reports enclosure conditions through the management interface, so a cabinet cooking in summer sun is visible before the switch throttles. ^^ Intelligent PoE Management & Device Protection: Advanced PoE control features including PD Alive Check (auto device recovery), Remote PoE Reboot, Extend Mode for long-distance devices, Per-Port PoE Enable/Disable, Total Power Budget Management, and Perpetual PoE to prevent camera downtime during switch reboot or firmware upgrades.