PoE Texas 802.3af Power Over Ethernet PoE Splitter + MicroUSB Connectors and PoE Injector - Single Port Power Over Ethernet Passive PoE Adapter

WT-AF-5V10W: 802.3 af Power over Ethernet PoE Splitter / Converter for 5 volt non-PoE devices. Extend power up to 328 feet away from the power source. Power USB devices via an ethernet cable with gigabit data transfer. This Power over Ethernet splitter comes with 2 micro
USB to ethernet adapters: a right angle adapter and a left angle adapter to fit in tight spaces and avoid limitations due to device geometry and position. 5v 10w PoE splitter compatible with non-PoE Security Cameras, Tablets, Raspberry Pi, Smart Home Devices, Android tablet, Foscam, Dropcam, Sonoff PTZ cam. The 1.35 mm x 3.5 mm DC barrel fits the adapters. Converts and 'splits' 44-56v PoE into 5 volts, 10 watts of power on its DC barrel with divided 10/100/1000 gigabit data on its RJ45 connector. Requires an IEEE 802.3 af PoE switch or 802.3 af PoE Injector (sold separately).
PT-GPOE-1B-48V15W: Instantly upgrade your current network switch to PoE. This PoE injector extends 48v Power over Ethernet up to 328 feet via ethernet cable. A passive PoE injector always delivers the same voltage as its power source. Power PoE Splitters, IP security cameras, VoIP desktop phones, WiFi access points, or other low voltage 802.3 af devices through a network data cable using this passive Power over Ethernet adapter / single port injector. This PoE injector 48v integrated unit delivers 48 volts, 15 watts of reliable passive (Always On) PoE power for devices labeled 802.3 af. Expand your network to areas with limited power lines and outlets. Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port.