Meet Your Seller

To the Internet media

See Seller Store

Main image of ElecGear M.2 2280 SSD Heatsink, EL-80P Heat Pipe + Double Deck Solid Aluminum Heat Sink Cooler for 80mm PCIe NVMe and SATA NGFF M2 SSD Internal Solid State Drive Memory, Thermal Pads Included

Alt view image 2 of 5 - ElecGear M.2 2280 SSD Heatsink, EL-80P Heat Pipe + Double Deck Solid Aluminum Heat Sink Cooler for 80mm PCIe NVMe and SATA NGFF M2 SSD Internal Solid State Drive Memory, Thermal Pads Included

Alt view image 3 of 5 - ElecGear M.2 2280 SSD Heatsink, EL-80P Heat Pipe + Double Deck Solid Aluminum Heat Sink Cooler for 80mm PCIe NVMe and SATA NGFF M2 SSD Internal Solid State Drive Memory, Thermal Pads Included

Alt view image 4 of 5 - ElecGear M.2 2280 SSD Heatsink, EL-80P Heat Pipe + Double Deck Solid Aluminum Heat Sink Cooler for 80mm PCIe NVMe and SATA NGFF M2 SSD Internal Solid State Drive Memory, Thermal Pads Included

Alt view image 5 of 5 - ElecGear M.2 2280 SSD Heatsink, EL-80P Heat Pipe + Double Deck Solid Aluminum Heat Sink Cooler for 80mm PCIe NVMe and SATA NGFF M2 SSD Internal Solid State Drive Memory, Thermal Pads Included

Shop All Barrow Mods Products | Visit To the Internet media Store

ElecGear M.2 2280 SSD Heatsink, EL-80P Heat Pipe + Double Deck Solid Aluminum Heat Sink Cooler for 80mm PCIe NVMe and SATA NGFF M2 SSD Internal Solid State Drive Memory, Thermal Pads Included

[Double Heatsink] The SSD cooler features two layers of aluminum heatsink decks linked by 4 high-end 4mm heat pipes. The heat produced by M.2 2280 SSD will be absorbed by the heatpipe and effectively conducted to both the upper and bottom heatsink. 12 to 25 degrees Celsius drop is expected. NVMe and SATA M.2 SSD are supported. Suitable for PCIE 4.0 Gen4 NVMe
[High-end Heat Pipe] The cooler boasts 4x4mm heatpipe seamlessly embedded in the two layers of solid aluminum heatsink. Passive design with no cooling fan is for being totally silent. The heatsink is the ultimate cooling solution to heat management of 2280 SSD
[Thermal Pads] 2 pieces of thermal pads for excellent heat dissipation. High performance at 4.8W/m-k. The pre-divided small pads are supposed to paste onto the main control IC and memory chips, while the big single-sided pad is to apply to the U-shaped middle frame facing against the bottom of the SSD
[Compatibility Note] The cooler fits NVMe and SATA SSD in 80mm

Overview

Specs

Reviews

Any questions? Our AI beta will help you find out quickly.

Try me now

2x Layers of Aluminum Heatsink Decks 4x High Performance 4mm Heat Pipes 2x High-end Silicon Thermal Pads Fits M. 2 SSD in 2280 form factor Ready for PCIE 4.0 Gen4 NVMe
Product Size: 89Lx 25.5W x 28.5H mm
Product Weight: 120g[Compatibility Note]1. Fits NVMe and SATA SSD in 80mm M. 2 form factor alone. 2230, 2242 and 2260 are not supported. 2. The memory can be single-sided or double-sided. 3. Please make sure your desktop PC has enough space to accommodate the kit: Minimum width is more than 25.5 -mm / 1.01 -inchMinimum height is more than 26-mm / 1.03 -inch above the SSD[Packaging]1x ElecGear EL-80P SSD Heatsink10x Thermal Pads for Memory Chips (Pre-divided Blue)1x Thermal Pad for SSD Back Side (Single-sided Grey)1x PH00 Screwdriver1x Screw Set

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
CONTACT

Return Policies

Return for refund within: 30 days
Return for replacement within: 30 days
This item is covered by To the Internet media Return Policy

Manufacturer Contact Info

For a directory of all our manufacturers, please click below.
Manufacturers Directory

Item#: 9SIBM6CKR49166