6-Foot USB TTL serial adapter built with FTDI FT232RL chip for 3.3V logic level serial communication (rx, tx and GND)It is built with FT232r chip that its royalty-free VCP driver allow for communication as a standard COM port and D2XX direct drivers provide DLL application programming interface; a great conversion data cord to meet with your needs of debugging, boot-loading, programming, etc. The original FT232 chip is embedded in the USB-A end; 6 way 0.1 header connector with VCC (5V power) and GND (ground), as well as RXD, TXD, RTS and CTS at 3V logic level.
Applications: Upgrading Legacy Peripherals to USBInterface Microcontroller UART or I/O, FPGA / PLD to USBAs a switching device in driving lamps and relaysReplace MAX232 type level shifters allowing for direct connection of products to PCUsed in processors of mini computers like DEC VAXIndustrial Control, USB Software, Hardware Encryption Dongle, printer, video display terminals, Oscilloscope, measurement device, microprocessor, light and remote controller, etc. USB to uart wire, entire USB protocol handled by the electronics in the cable; UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity; Data transfer rates from 300 to 3M baud rate at TTL levels; Internal EEPROM with users writable area; Supply voltage comes from USB bus, no external supply required; UHCI / OHCI /
EHCI host controller compatibleInterfaces: USB 2.0 type A Male Port; 6 pin Female Socket headerSupports Windows 2008, XP, Vista, CE 4.2, 5.0 and 6.0, Windows 11, 7, 8, 8.1, 10; Mac, LinuxNOTE: If any installation or usage issues, please email us or you may download a driver and usage guide on FT232 chip official websiteWhats Included1x Type A male USB to Serial TTL Level Converter Cable 6 ft1x Manual