Your Browsing History
- Free 30-day Returns
$89.99
Meet Your Seller
LoRa Node for Meshtastic & MeshCore, Built-in GPS Off-Grid Mesh Device
- STAY CONNECTED WITHOUT CELL SERVICE: Build your own off-grid communication network with MeshCore or Meshtastic LoRa technology. Send text messages, share locations, and relay data even when cellular networks are unavailable. Ideal for hiking, camping, emergency preparedness, and outdoor adventures.
- LONG RANGE MESH COMMUNICATION WITH GPS: Equipped with Semtech SX1262 LoRa radio and built-in GNSS/GPS module for reliable location sharing and telemetry. Equipped with a high-quality 915MHz antenna with VSWR 1.3.
- LONG-LASTING BATTERY FOR OUTDOOR USE: Built-in 3000mAh rechargeable Li-Po battery Runtime varies with transmit activity, GPS use, display settings and operating conditions.
- PRE-FLASHED WITH MESHTASTIC FIRMWARE: enables quick setup without programming. To use MeshCore, you must re-flash the appropriate firmware and reconfigure the device.
- COMPACT HARDWARE WITH DISPLAY CONTROL: Powered by ESP32-s3 MCU and SX1262 LoRa chip with a 0.96-inch LOED display and physical buttons
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Build Your Own Off-Grid Communication NetworkWhen cellular service is unavailable, stay connected with this MeshCore or Meshtastic LoRa node. Designed for hikers, campers, outdoor explorers, emergency preparedness users, and wireless communication enthusiasts, this device enables decentralized text messaging, location sharing, and data relay without relying on cellular networks or monthly fees. Long Range Communication Beyond Cell CoveragePowered by the Semtech SX1262 LoRa chip and ESP32-S3 Bluetooth 5.0 MCU, this compact device creates a reliable mesh communication network. The built-in GNSS/GPS module provides real-time location tracking, while the high-gain 915MHz antenna supports extended line-of-sight communication in open environments.
Ready to Use with Meshtastic FirmwarePre-flashed with Meshtastic firmware for quick setup. No complicated programming or firmware flashing required. Simply power on, connect through Bluetooth, and start building your local mesh network. Designed for Outdoor AdventuresWhether hiking in remote areas, camping off-grid, preparing for emergencies, or exploring wireless communication projects, this portable LoRa node provides a reliable way to exchange messages and share locations when traditional networks fail.
Key Features: - Meshtastic firmware pre-installed- Equipped with a high-quality 915MHz antenna. - Built-in GPS/GNSS location tracking- Durable ASA housing, -20C to +70C operating temperature- No cellular network or subscription requiredTechnical
MCU: ESP32-S3LoRa
Chip: Semtech SX 12620.96 -inch
OLED display with physical buttonsBattery: 3000mAh 3.7V
Li-Po BatteryCharging: USB-C 5V
InputFrequency: 863MHz - 928MHzImportant
Notes: - Communication range depends on terrain, antenna height, and environmental conditions. - This device is not waterproof. - The outer shell uses custom 3D printing; minor surface layer lines are normal and do not affect performance. - Advanced MeshCore or Meshtastic configuration may require learning from official open-source resources.
Ready to Use with Meshtastic FirmwarePre-flashed with Meshtastic firmware for quick setup. No complicated programming or firmware flashing required. Simply power on, connect through Bluetooth, and start building your local mesh network. Designed for Outdoor AdventuresWhether hiking in remote areas, camping off-grid, preparing for emergencies, or exploring wireless communication projects, this portable LoRa node provides a reliable way to exchange messages and share locations when traditional networks fail.
Key Features: - Meshtastic firmware pre-installed- Equipped with a high-quality 915MHz antenna. - Built-in GPS/GNSS location tracking- Durable ASA housing, -20C to +70C operating temperature- No cellular network or subscription requiredTechnical
Specifications
:MCU: ESP32-S3LoRa
Chip: Semtech SX 12620.96 -inch
OLED display with physical buttonsBattery: 3000mAh 3.7V
Li-Po BatteryCharging: USB-C 5V
InputFrequency: 863MHz - 928MHzImportant
Notes: - Communication range depends on terrain, antenna height, and environmental conditions. - This device is not waterproof. - The outer shell uses custom 3D printing; minor surface layer lines are normal and do not affect performance. - Advanced MeshCore or Meshtastic configuration may require learning from official open-source resources.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by AetherWide Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...











