Netis P124GH Uplink POE Switch; 24x 10/100M POE Ports (Data/Power), 1x 10/100/1000M RJ45 Ports (Data), 1x 1000M Uplink SFP Slot (Data), and 1x Combo 100/1000Mbps SFP Slot (Data); Steel Case

Netis P124GH Uplink POE Switch; 24x 10/100M POE Ports (Data/Power), 1x 10/100/1000M RJ45 Ports (Data), 1x 1000M Uplink SFP Slot (Data), and 1x Combo 100/1000Mbps SFP Slot (Data); Steel Case

Key Features:
- Follow IEEE 802.3 Ethernet and IEEE 802.3 u Fast Ethernet Protocol
- POE IEEE 802.3 af/at compliant Powered Device (PD)
- Ports 1 to 24 features POE power supply capability and can be used as power over Ethernet devices; 2x 10/100/1000B-T Uplink and 2x1000B-x SFP. SFP1, LAN1, SFP2, LAN2 are photoelectric multiplexing ports
- Support full duplex based on IEEE 802.3 x and half duplex based on Backpressure
- Auto MDI/MDIX crossover for all ports
- Non-blocking wire speed forwarding
- MAC address auto-learning & auto-aging
- Steel case, the total POE power budget of 360W
- Just Plug and Play

Specifications

:
- Interface: 24 x 10/100M POE ports (Data /Power); 1x 10/100/1000M RJ45 ports (Data); 1x 1000M uplink SFP Slot (Data); 1x Combo 100/1000Mbps SFP Slot (Data)
- LED:
PWR: Lighting - The device is powered on normally;
E: Lighting - The VLAN+EXTEND mode is enabled;
V: Lighting - The VLAN mode is enabled;
Port: Lighting - Port link is normal; Blinking - Data in transit
- Store & Forwarding: Yes
- Switching Capacity: 12.8G
- MAC Address Table Size: 16K
- Jumbo Frame: 2048 byte
- Mode: VLAN Mode; Normal Mode; VLAN + EXTEND Mode
- Data Transfer Rate: 10Mbps(Half-duplex and Full-duplex); 100Mbps(Half-duplex and Full-duplex); 1000Mbps(Full-duplex)
- Overall Dimensions (LxWxH): 17.32 x 7.08 x 1.77 inches