CHIGEE XR-1 Motorcycle Dash Cam Front and Rear Discreet Screen-Free Dual 1080P 60FPS Cameras, Auto Loop Recording, Voice Alerts, Parking Guard, Impact Lock, 5GHz Wi-Fi, IP69K Main Unit, IP68 Cameras

Start the Bike, Record AutomaticallyForgotten buttons and unrecorded rides defeat the purpose of a dash cam. Hardwired to your motorcycle, XR-1 powers on and begins recording automatically when the bike startsno app to open and no manual setup before every ride. Continuous loop recording automatically replaces the oldest regular footage when the memory card is full, providing reliable front and rear coverage for daily commuting, touring, unexpected road incidents, and everyday evidence. ^^ Dual 1080P 60FPS for Clearer EvidenceFast traffic, vibration, tunnels, and changing sunlight can make ordinary footage difficult to use.

XR-1 records simultaneously through front and rear 1080P cameras at up to 60FPS. Its 64-bit dual-core processor combines HDR processing, intelligent stabilization, f/ 1.8 lenses, and a 136.6 wide field of view to deliver smoother motion, balanced exposure, and more road context in bright sunlight, deep shadows, rough roads, and rapidly changing conditions. ^^ Know It Is Recording Before You RideDiscovering a full card, loose camera, or recording failure only after an incident is too late. XR-1 monitors recording status, microSD card condition, camera connections, and system errors, then gives a clear voice alert when attention is needed.

Confirm the system is ready before setting off. Voice prompts support English, Japanese, Traditional Chinese, and Korean. ^^ Protect the Clip You Cannot Afford to LoseCritical footage should never disappear into ordinary loop recording. XR-1s built-in G-sensor detects sudden impacts or abnormal movement and automatically locks the current video. Power-loss protection helps preserve footage before an unexpected shutdown. When stopped, use the physical buttons to manually lock a clip or capture a photo. ^^ Parking Guard Watches While You Are AwayTip-overs, parking impacts, and hit-and-runs often happen when no rider is present.

After the engine is switched off, XR-1 enters low-power standby and wakes to record when vibration or impact is detected. A voice alert reports the event at the next startup. Voltage protection pauses monitoring if the battery falls below the protection threshold. ^^ Fast 5GHz Wi-Fi Without Removing the CardReviewing footage should not mean removing the seat, pulling the card, or connecting cables. Use the CHIGEE GO App to preview front or rear video, download and share clips, and adjust settings. Dedicated 5GHz Wi-Fi delivers speeds above 10MB/s and supports convenient reconnection.

Keep your phone within approximately 810 meters during Wi-Fi access. ^^ Discreet Screen-Free InstallationBulky screens and extra brackets can clutter the cockpit and change your motorcycles original look. Measuring only 70.6 55.6 24.5 mm, the compact main unit and wiring can be concealed under the seat or inside bodywork when space allows. The detachable main cable simplifies routing through narrow panels, while both cameras remain externally mounted for a clear road view. ^^ Built for Rain, Vibration, Heat, and Long RidesOrdinary cameras may struggle with motorcycle vibration, rain, mud, and continuous heat.

XR-1 uses an IP69K-rated main unit and IP68-rated cameras, plus a PC+TPU housing, reinforced nylon frame, floating shock-absorbing circuit board, and aluminum-alloy heat-dissipation structure. Install the main unit away from the engine and other high-heat areas. ^^ Before You BuySD Card, Wiring, and GPSMissing accessories or incompatible installation requirements can delay setup. A microSD card is not included; use a high-endurance U3/A2/V30 or higher 16GB256GB card. XR-1 requires hardwired installation on a standard 12V motorcycle system with 1118V DC input. GPS tracking and handlebar controls require the optional wired GPS controller, sold separately.