Your Browsing History
Meet Your Seller
Heltec V4 Meshtastic LoRa Device with GPS 3000mAh Battery, ESP32-S3 SX1262
- PRE-ASSEMBLED V4 GPS DEVICE: Built around the Heltec WiFi LoRa 32 V4.3 with L76K GNSS, 0.96-inch OLED, matching enclosure and 915MHz antenna. The device arrives pre-assembled; the included 3000mAh battery is shipped installed.
- OFF-GRID MESHTASTIC & MESHCORE COMMUNICATION: Use the V4 as a Meshtastic node, portable LoRa radio or GPS-enabled mesh device for communication and location sharing beyond cellular coverage. WiFi and Bluetooth support convenient setup and firmware access for hiking, camping, field projects and mobile mesh networks
- ESP32-S3R2 + SX1262 V4.3 HARDWARE: Powered by ESP32-S3R2 and SX1262 with 2MB PSRAM and 16MB Flash. Up to 281dBm LoRa output and -137dBm sensitivity support reliable long-range 915MHz communication while retaining WiFi and Bluetooth connectivity
- L76K GNSS FOR LOCATION SHARING: The included L76K GNSS module adds positioning for GPS-enabled Meshtastic use, including node location and location sharing through supported app features. A practical cho
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
PRE-ASSEMBLED V4
GPS DEVICE: Built around the Heltec WiFi LoRa 32 V 4.3 with L76K GNSS, 0.96 -inch OLED, matching enclosure and 915MHz antenna. The device arrives pre-assembled; the included 3000mAh battery is shipped installed. ^^
OFF-GRID MESHTASTIC & MESHCORE COMMUNICATION: Use the V4 as a Meshtastic node, portable LoRa radio or GPS-enabled mesh device for communication and location sharing beyond cellular coverage. WiFi and Bluetooth support convenient setup and firmware access for hiking, camping, field projects and mobile mesh networks ^^ ESP32-S3R2 + SX1262 V 4.3
HARDWARE: Powered by ESP32-S3R2 and SX1262 with 2MB PSRAM and 16MB Flash. Up to 281dBm LoRa output and -137dBm sensitivity support reliable long-range 915MHz communication while retaining WiFi and Bluetooth connectivity ^^
L76K GNSS FOR LOCATION SHARING: The included L76K GNSS module adds positioning for GPS-enabled Meshtastic use, including node location and location sharing through supported app features. A practical choice for outdoor navigation, field deployments and portable mesh projects ^^ 3000mAh BATTERY +
OLED DISPLAY: The included rechargeable 3000mAh battery supports portable use, while the 0.96 -inch OLED keeps device and mesh status visible at a glance. The protective enclosure creates a compact carry-ready setup, and USB-C keeps charging and firmware work convenient ^^ **IMPORTANT
CHARGE BEFORE FIRST USE: ** This device comes pre-assembled with a 3000mAh battery. The battery level may be low after storage and transportation. For best performance, please fully charge the device via USB-C before powering it on and completing the initial setup. If the device does not power on immediately, connect it to USB-C and allow it to charge before trying again.
GPS DEVICE: Built around the Heltec WiFi LoRa 32 V 4.3 with L76K GNSS, 0.96 -inch OLED, matching enclosure and 915MHz antenna. The device arrives pre-assembled; the included 3000mAh battery is shipped installed. ^^
OFF-GRID MESHTASTIC & MESHCORE COMMUNICATION: Use the V4 as a Meshtastic node, portable LoRa radio or GPS-enabled mesh device for communication and location sharing beyond cellular coverage. WiFi and Bluetooth support convenient setup and firmware access for hiking, camping, field projects and mobile mesh networks ^^ ESP32-S3R2 + SX1262 V 4.3
HARDWARE: Powered by ESP32-S3R2 and SX1262 with 2MB PSRAM and 16MB Flash. Up to 281dBm LoRa output and -137dBm sensitivity support reliable long-range 915MHz communication while retaining WiFi and Bluetooth connectivity ^^
L76K GNSS FOR LOCATION SHARING: The included L76K GNSS module adds positioning for GPS-enabled Meshtastic use, including node location and location sharing through supported app features. A practical choice for outdoor navigation, field deployments and portable mesh projects ^^ 3000mAh BATTERY +
OLED DISPLAY: The included rechargeable 3000mAh battery supports portable use, while the 0.96 -inch OLED keeps device and mesh status visible at a glance. The protective enclosure creates a compact carry-ready setup, and USB-C keeps charging and firmware work convenient ^^ **IMPORTANT
CHARGE BEFORE FIRST USE: ** This device comes pre-assembled with a 3000mAh battery. The battery level may be low after storage and transportation. For best performance, please fully charge the device via USB-C before powering it on and completing the initial setup. If the device does not power on immediately, connect it to USB-C and allow it to charge before trying again.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by UsaLogic Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...











