Your Browsing History
- Free 30-day Returns
$126.58
Meet Your Seller
20Pack Low Voltage Wire Connectors, 12-18 Gauge UL Listed Low Voltage Cable Connector Outdoor Lighting Connectors for Landscape Lighting/Pathway Light/Spotlight
- ONE PIECE PER FIXTURENot as the screw tight connector which TWO PIECES PER CONNECTION, each of our low voltage connector establishes a connection. Other 20pack connectors just covering 10 lights, our 20 pack is equal to 20 pairs COVERING 20 LIGHTS. New Design but still work well !
- SUPER EASY TO INSTALLNO Splicing/Crimping or tools required! First, insert and lock in your conductors from the landscape lights. Second, squarely place and compress the landscape light connectors around each side of your low voltage feed wire. Last, lock the connector. Quickly and easily install low voltage wire to your lighting fixture in 2 minutes or less!
- WIDELY APPLICATIONPerfect match for 12 /14 /16/18 gauge wire of low voltage landscape lighting. Wide used for garden, pathway, walkway, driveway, yard, patio, lawn, walls, trees, flags etc
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
RELIABLE SAFETY AND QUALITYAs UL-listed landscape lighting low voltage wire connectors, every single wire connector is well made and secure fit with a great connection, will be fine choice for your long term use of outdoor lighting fixtures.
SOLUTION FOR THINNER CABLE The low voltage connector is designed for SPT-1 or SPT-2 light wire, if your light wire is thinner than that type, please stripping and folding the cable over then fasten clamp, also check all connections with slight pressure with pliers, it will start to work normally.
Product Description
AizzKry Low Voltage Landscape Wire Connectors
Are you Looking for a landscape connector that just simply works without having to dig and replace faulty wire connectors every single year?
Please Try out our Fastlock landscape wire connectors and quickly fix faulty connections.
Why choose us?
1. Each of our low voltage connector per connection--NOT AS OTHER CONNECTOR which two pieces per connection.
2. EASY TO INSTALL - NO Splicing/Crimping or tools required! Finish it in 1 minute!
3. Replace old faulty connectors found on outside wall mounts, edge, walkway, garden, fences, downlight.
The low voltage connectors are designed for wet soil.
So the connectors will work normally when you bury them in the soil, cobblestone, or under your landscape mulch.
If your area rains a lot, please wrap them with electrical tape, they will be ok.
IMPORTANT NOTE: PLEASE DO NOT USE THEM IN STANDING WATER.
Warm Tips for Installation:
1. These connectors are used with landscape lighting systems only. If the insulation of the wire is too hard please heat and soften it first.
2. Be sure both of the needles are piercied into the power cord before you lock it. Pay more attention the first time you use it.
NOTE: PLEASE TURN OFF THE POWER BEFORE INSTALLATION.
PLEASE STRIP DOWN THE LIGHT WIRE INSULATION 1/2INCH.
IF YOUR COOPER WIRE IS LITTLE THIN, YOU MIGHT FOLD OVER THE WIRE THEN INSERT THE LIGHTING WIRE.
Light up your garden, shrubs, as up lights on trees or to light up fish pond. Enjoy your beautiful night~
SOLUTION FOR THINNER CABLE The low voltage connector is designed for SPT-1 or SPT-2 light wire, if your light wire is thinner than that type, please stripping and folding the cable over then fasten clamp, also check all connections with slight pressure with pliers, it will start to work normally.
Product Description
AizzKry Low Voltage Landscape Wire Connectors
Are you Looking for a landscape connector that just simply works without having to dig and replace faulty wire connectors every single year?
Please Try out our Fastlock landscape wire connectors and quickly fix faulty connections.
Why choose us?
1. Each of our low voltage connector per connection--NOT AS OTHER CONNECTOR which two pieces per connection.
2. EASY TO INSTALL - NO Splicing/Crimping or tools required! Finish it in 1 minute!
3. Replace old faulty connectors found on outside wall mounts, edge, walkway, garden, fences, downlight.
The low voltage connectors are designed for wet soil.
So the connectors will work normally when you bury them in the soil, cobblestone, or under your landscape mulch.
If your area rains a lot, please wrap them with electrical tape, they will be ok.
IMPORTANT NOTE: PLEASE DO NOT USE THEM IN STANDING WATER.
Warm Tips for Installation:
1. These connectors are used with landscape lighting systems only. If the insulation of the wire is too hard please heat and soften it first.
2. Be sure both of the needles are piercied into the power cord before you lock it. Pay more attention the first time you use it.
NOTE: PLEASE TURN OFF THE POWER BEFORE INSTALLATION.
PLEASE STRIP DOWN THE LIGHT WIRE INSULATION 1/2INCH.
IF YOUR COOPER WIRE IS LITTLE THIN, YOU MIGHT FOLD OVER THE WIRE THEN INSERT THE LIGHTING WIRE.
Light up your garden, shrubs, as up lights on trees or to light up fish pond. Enjoy your beautiful night~
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Halo Electronics Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...