Your Browsing History
Meet Your Seller
LEADBRAND RVShield 30 Amp RV EMS Surge Protector & Power Manager, 9 Codes
- FULL 30A RV EMS WITH AUTO POWER-OFF (EPO) - A bad pedestal does not always look bad. RVShield is an Electrical Management System (EMS): it checks incoming voltage (below 104V, above 132V), reverse polarity, open ground, 30mA equipment-level ground fault and 200F plug heat before power reaches your RV, adds 4200J of surge protection, and cuts power the moment something is wrong. No app, no remote switch.
- AUTO POWER-OFF (EPO). DELAYED RESTART. - RVShield cuts power at the unit whenever shore power goes unsafe. Voltage and frequency faults (E2, E3, E7, E8) recover on their own after the delay you set (0, 30 or 180 seconds) - pick 30 or 180 for A/C protection. Overload, equipment-level ground fault, over-temperature, reverse polarity and open ground (E0, E1, E4, E5, E6) stay off until you clear the cause and press POWER; a full blackout also needs one press. No app, no remote switch.
- HEAT IS WHAT VOLTAGE MONITORING CANNOT SEE - 200F THERMAL AUTO-SHUTOFF: A loose or worn plug can slow
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
FULL 30A RV EMS WITH AUTO POWER-OFF (EPO) - A bad pedestal does not always look bad. RVShield is an Electrical
Management System (EMS): it checks incoming voltage (below 104V, above 132V), reverse polarity, open ground, 30mA equipment-level ground fault and 200F plug heat before power reaches your RV, adds 4200J of surge protection, and cuts power the moment something is wrong. No app, no remote switch. ^^ AUTO POWER-OFF (EPO). DELAYED RESTART. - RVShield cuts power at the unit whenever shore power goes unsafe. Voltage and frequency faults (E2, E3, E7, E8) recover on their own after the delay you set (0, 30 or 180 seconds) - pick 30 or 180 for A/C protection. Overload, equipment-level ground fault, over-temperature, reverse polarity and open ground (E0, E1, E4, E5, E6) stay off until you clear the cause and press POWER; a full blackout also needs one press. No app, no remote switch. ^^ HEAT IS WHAT VOLTAGE MONITORING CANNOT SEE - 200F
THERMAL AUTO-SHUTOFF: A loose or worn plug can slowly overheat for hours while you are asleep inside, and voltage monitoring alone cannot see that heat. RVShield's built-in sensor watches temperature around the clock and cuts all power the moment it reaches 200F (93C), showing an E5 code; once it cools, plug back in and press POWER. ^^ 9 FAULT CODES ON ONE SCREEN - Voltage, amps, kW, kWh and temperature, all on the unit. No extra meters, no app, nothing to pair.
E0-E8 name what is wrong: reverse polarity, ground fault, high or low voltage, overload, over-temperature, open ground and frequency faults. IN THE BOX - the RVShield unit x1, a rain cover x1 and a user manual x1. It does not replace a personnel GFCI. ^^ BUILT FOR 30A HOOKUPS ONLY - Portable TT-30 design for travel trailers, campers, Class C motorhomes, fifth wheels and pop-ups that use standard 30 amp shore power. NOT for 50 amp hookups. It monitors and shuts off power; it does not boost or raise low voltage. Weather-resistant housing equivalent to NEMA 3R, bright LED display, a built-in lock ring, an included 360 rain cover and a 1-year limited warranty. Do not submerge or leave connectors in standing water.
Management System (EMS): it checks incoming voltage (below 104V, above 132V), reverse polarity, open ground, 30mA equipment-level ground fault and 200F plug heat before power reaches your RV, adds 4200J of surge protection, and cuts power the moment something is wrong. No app, no remote switch. ^^ AUTO POWER-OFF (EPO). DELAYED RESTART. - RVShield cuts power at the unit whenever shore power goes unsafe. Voltage and frequency faults (E2, E3, E7, E8) recover on their own after the delay you set (0, 30 or 180 seconds) - pick 30 or 180 for A/C protection. Overload, equipment-level ground fault, over-temperature, reverse polarity and open ground (E0, E1, E4, E5, E6) stay off until you clear the cause and press POWER; a full blackout also needs one press. No app, no remote switch. ^^ HEAT IS WHAT VOLTAGE MONITORING CANNOT SEE - 200F
THERMAL AUTO-SHUTOFF: A loose or worn plug can slowly overheat for hours while you are asleep inside, and voltage monitoring alone cannot see that heat. RVShield's built-in sensor watches temperature around the clock and cuts all power the moment it reaches 200F (93C), showing an E5 code; once it cools, plug back in and press POWER. ^^ 9 FAULT CODES ON ONE SCREEN - Voltage, amps, kW, kWh and temperature, all on the unit. No extra meters, no app, nothing to pair.
E0-E8 name what is wrong: reverse polarity, ground fault, high or low voltage, overload, over-temperature, open ground and frequency faults. IN THE BOX - the RVShield unit x1, a rain cover x1 and a user manual x1. It does not replace a personnel GFCI. ^^ BUILT FOR 30A HOOKUPS ONLY - Portable TT-30 design for travel trailers, campers, Class C motorhomes, fifth wheels and pop-ups that use standard 30 amp shore power. NOT for 50 amp hookups. It monitors and shuts off power; it does not boost or raise low voltage. Weather-resistant housing equivalent to NEMA 3R, bright LED display, a built-in lock ring, an included 360 rain cover and a 1-year limited warranty. Do not submerge or leave connectors in standing water.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by JMDesign Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...











