Wiring: OUTPUT+ to LOAD+, OUTPUT- to LOAD-; INPUT+ to BAT+, INPUT- to
BAT- Note: Never connect to solar panel, PWM/MPPT charge controller, inverter or wind turbine. Never charge the battery. Keep good air convection. Never reverse the polarity. Use the enough big cable to avoid the voltage drop.
Specifications
: 1. 100% full power and stable current output, non-isolated module.
2. Industry grade DC 12V to DC 24V 15A 360W step up converter, efficiency up to 95%.
3. Die-cast aluminum shell, epoxy potting, cooling by air convection; Waterproof level IP68 and anti-shock protection.
4.
Protections: Over-current, Over-voltage, Over-temperature, Over-load and Short-circuit, auto-recovery when device is back to normal operating.
5.
Certificates: CE/RoHS, 1 year, up to 100, 000 hours.
Input Rated Voltage: 12V DC
Input Voltage Range: 10V-16 DC
Output voltage: 24V DC
Output Current: 15 Amp
Output Rated Power: 360W
Efficiency: 97% (half load); 95% (full load)
Ripple Wave: 40Mv
Line Regulation: 0.2 %
Load Regulation: 0.2 %
Voltage Accuracy: 1.5 %
Enclosures: IP68 Case
Operating Temperature: -40 85C
Dimensions (WxDxH): 2.9 '' x 2.9 '' x 1.2 '' / 7.4 x 7.4 x 3.1 cm Fixing
Hole Diameter: 5mm( 0.20 inch)
Net weight: 9.6 oz/272g