2 Port Dual Monitor Displayport KVM Switch, DP KVM Switch with Audio, with USB 2.0 Hub and Cables Support Hotkey Switching Resolution Up to 4096x2160 @60Hz 4:4:4

Displayport KVM 4K Dual Monitor KVM Displayport Switch 4K USB Display Port KVM Switches

One USB set of keyboard, mouse and 2 monitor controls 2 multi graphic-card displayport interface computers. With audio and microphone output. (Tips: this KVM switch is DP1.2 60Hz version, it doesn't compatible DP1.4 version, 100Hz, 120Hz, 144Hz devices). Metal body, not easy to slide.

Installation Step;

1. Power off all devices;

2. Connect your computers to the KVM Switch by USB and displayport cables.

3. Plug your mouse and keyboard to correspondent USB mouse and keyboard port on front panel;

4. Connect your monitors to output port of the KVM switch by displayport cables;

5. Plug speaker or microphone into KVM switch if needed;

6. Turn on KVM switch;

7. Boot your computers.

Tips:

1. For MAC and Linux system, mouse/keyboard maybe out of control, you can make this operate: click right [CTRL] 2 times, then click [F2], at last click [Enter]. (whole operate time should not over 2s), could solve the issue.

2. For the keyboard and mouse freeze, you can make this operate: click right [CTRL] 2 times, then click [ESC] 3 times, at last click [Enter]. (whole operate time should not over 2s), could solve the issue.